Archery Talk Forum banner

arrow

  1. For Sale Preowned Easton ACE 670 C2 Arrows 27-3/8" W/ 80 Gr Points (Qty: 8)

    F.I.T.A. Classified
    These arrows are preowned (they have been shot). Several arrows have very minor scuffs. The arrows are 27-3/8" long measured from the back of the shaft to the end of the point. There are 8 arrows included in this lot. All 8 arrows have 80 grain stainless steel Easton points $180 with Free...
  2. Building A Bare Shaft Arrow

    General Archery Discussion
    I wanna build a couple bare shaft arrows for tuning purposes. I plan on using Black Eagle X-Impact arrows that i plan on shooting. I will be shooting a 4 fletch setup with AAE pro max vanes that weigh 4.7-4.9grains each vane. The 4 AAE pro max vanes will weigh around 18.8 - 19.6 grains. I...
  3. Turkey Arrow Setup

    Bowhunting and Bowhunter Showcases
    Hey guys, I am gonna be hunting some turkey this fall and I was wondering what arrow and broadhead setups you guys like to shoot. Any help would be great!
  4. Easton Hexx Spine

    General Archery Discussion
    I shoot a Vertix 29.5” DL 65# and am interested in the Easton hexx arrows. I’ve played around with the OT2 software and am having a hard time deciding on which spine to choose. Both of these images are with a 29” arrow because my local bow shop says he wouldn’t go lower than .5” below my DL(I’d...
  5. I Got The Shaft. LOL

    General Archery Discussion
    I dropped my new bow off to a local bow shop and feel i got the shaft all the way around. I had the bow shop setup the bow. I got home and started looking bow over. Bow is a Bowtech Realm Sr6. I have a 27" draw. They had the bottom draw stop post in 27" hole and the top one in the 26" hole. I...
  6. For Sale Easton Arrow Puller Puck Single (New)

    F.I.T.A. Classified
    Proprietary high-grip compound for maximum arrow grip. Flat puck design for maximum grip leverage. This item is new and unopened. Cost: $8 Shipping: Calculated based on location Payment Method: PayPal Message me if you are interested or have any questions.
  7. SKB Hunter Bow Case Straps ??

    General Archery Discussion
    I just received my new SKB 4117 hunter series hard case. This is the 2nd skb hunter case i have ordered. I have seen about 20 skb hunter cases over the years. This new case has velcro straps on the inside. This is the first time seeing these tie-down straps. Is this a newer version or a older...
  8. *Broadhead Suggestions*

    Bowhunting and Bowhunter Showcases
    Hey Guys, Looking for some suggestions for broadheads. I'm looking at 2-blades with a bleeder blade of some sort and I need them in 150gr weights. Just looking to see what some guys might have experienced with certain brands? Here's a bit of what I have been looking at: - Iron Will V150 -...
  9. Arrow Selection Help

    General Archery Discussion
    Hey guys recently picked up a VXR and a dozen of 300 spine match grade axis arrows cut at 27” with 150g at the front and an overall weight of around 465-470g. When I went to paper tune the bow at 62ish # it was tearing left. After moving the rest as far into the riser as possible it kept tearing...
  10. For Sale Hoyt quiver

    Arrows, Broadheads, Quivers and Arrow Components
    Hoyt 4 arrow quiver, black RH but i believe it can be swapped in good used condition all mounting hardware included as well as HHA mount bracket unsure of model asking $60 TYD
  11. arrow spine question

    General Archery Discussion
    i have a 2019 hoyt rx3 ultra at 29'', at 80# from all the research i have done i believe i am on the fence of 300 or 250 static spine for a build. not sure where i should be for total build weight for an arrow suited for elk hunting (assuming 450-500 but i could be wrong!) would love to know...
  12. Right arrows?

    General Archery Discussion
    I'm a 56 year old female and I'm getting back into archery after a few years away. In 2017 I purchased a Hoyt Horizon Pro 25 inch riser with SF Axiom Plus short 24 lb limbs. Shortly after purchasing the bow I injured by shoulder in a non-archery incident. Now that I'm getting back into it I'm...
  13. Arrow Building First-timer Questions

    General Archery Discussion
    I'm just starting to gather all of the gear I need for building my own arrows. I picked up a Bitzenburger Jig from Nock On. I was considering sticking with the arrows I have rather than using the Nock On specific arrows. All of the Nock On arrows are 6MM with an Outside Diameter of .267. The...
  14. new Avalon Hexagon multi arrow fletching jig - anyone used?

    General Archery Discussion
    Anyone with experience and feedback on a "new to me" multi arrow fletching jig, the "Avalon Hexagon Fletch?" I have been trying to find new JoJan- seem like they are out of business, quite a shame. This seems a viable alternative, but I can find no reviews on the net, hoping folks here might...
  15. Bowtech QAD Ultra Rest SR6 ??

    General Archery Discussion
    I put the Bowtech version rest on my SR6 and have a few questions. I have to rotate the flex guard dampener like others have mentioned. I was curious how far should the rest fall? If i hit the release button on the rest lightly it will fall to a 90°. If i take my finger and snap the rest...
  16. Nockturnal G vs Nock Out G Lighted

    General Archery Discussion
    I'm about to build some Black Eagle X-Impact 400 spine arrows that have a .165 inside diameter. I wanna pick up some lighted nocks and narrowed it down to these two brands. I know Firenock is the best when it comes to nocks. I just don't wanna spend that much money at this time. I have shot...
  17. Ideal Arrow Setup for pass throughs

    Bowhunting and Bowhunter Showcases
    Hi all, I'm new around here, and its going to be my third year bowhunting. Currently I use a pse brute x set at 60 pounds with a 28" draw. I use(d) easton fmj 340 cut to 29" with Rage hypodermic +P. Total arrow weight of 480ish, and shooting around 270 fps but never had it chronoed. Of the...
  18. Black Eagle X-Impact 400 Nock Collar/Bushing

    General Archery Discussion
    I just ordered some black eagle X-Impact arrows and I'm looking for some nock collars or bushings. I will be shooting the Micro M nock that came with arrows. I only see the pin bushings listed on BE website for the pin nocks. Any recommendations would be appreciated. Thanks 400 spine ID .165"...
  19. Easton ACC Arrow Build Help

    General Archery Discussion
    I plan on building some Easton ACC 3-49 arrows for my 60Lb bowtech realm SR6. I have a couple questions about arrow build and hoping i can get some recommendations. I'm color blind so i figured a white onestringer reflective arrow wrap. That way i can see blood on arrow wrap with my HD blood...
  20. LCA EZ Green Press Verse EZ Press

    General Archery Discussion
    I was thinking about ordering a press so i can tune, replace strings and cables on my new Bowtech Realm SR6. I have narrowed it down between the EZ green and EZ press. I have read the only difference is the wheel crank and the square channel is cut at 45° angles on the EZ press. I can't see...
Top