Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. General Archery Discussion
    Hey guys. Really cant figure out what my issue is here. My Hoyt I shoot now was already "tuned" from my pro shop when I bought it. I was curious about nock tuning my arrows so I decided to rip my fletchings off and give it a try. Shooting bareshafts through paper I was really nock left. No...
  2. General Archery Discussion
    To find the correct arrow length and spine combination I went off of eastons spine chart to get the correct spine. Starting with arrows a little long to trim down. I fletched one shaft and and kept another bareshaft. Bow is tuned and shooting bullet holes through paper. I sighted in fletched...
  3. ArcheryTalk Videos and Media Forum
    Is there a thread or videos someone can reference concerning bare shaft paper tuning? Trying to weed through to the best most informative threads or videos. Im just reading and seeing what others are doing, experiences they have ect ect. Maybe different tests with different weights and shafts...
  4. General Archery Discussion
    I’m over thinking this and driving myself nuts so I’m gonna ask you guys (stupid question incoming). I just bought an Elite Enkore. Picked it up today. Building a completely new set of arrows for it (I also have a Bowtech Solution, which is why I say completely new set). So my (stupid) question...
  5. General Archery Discussion
    Somewhat of a N00b. First year DIY tuning my bow. Got all the stuff (press, board, etc) to do it. Had a rather tough journey tuning my own bow. Think I have it mostly tuned (but isn't tuning a bow a constant?). Right now I am still shooting my arrows bareshaft (@20 yards) to: 1. Make my form...
  6. Bow Tuning
    First let me thank any and all of you who have provided insight and help in my journey. Now to my w00t w00t! Tiger Blood! Winner! This is my first year bow building and tuning. I bought a Bowtech Revolt as this years primary bow and have been working on it for several months now (yes my tuning...
  7. General Archery Discussion
    I’ve been doing my own tuning now for about a year. I’ve mostly learned from this website and YouTube, but today I discovered something that I haven’t been able to find any info on. I was bareshaft paper tuning a Mathews No Cam and Traverse and could not correct the left tear. I tried...
  8. Arrows & Strings
    Hello, I shoot recurve barebow and have ordered a set of new arrows. I have 38# OTF and ordered some 500 spined Victory VAP along with different glue in points. One of them is the TOPHAT SL CONVEX II VAP SPITZE .221+.229" (60-70-80 grains) bullet shaped head And the other one is the Top Hat...
  9. F.I.T.A, N.A.A., Collegiate Archery, And J.O.A.D.
    Hey all, I didn't want to thread-jack an ongoing tuning thread, so I started a new one. I have fletched shafts entering the bale fairly level. My bareshafts hit at the same vertical plane, but the nocks are all low. Eyeballing the angle difference, I'm guesstimating that the bareshafts are...
  10. General Archery Discussion
    Alright, so in April I bareshaft tuned my bow, was hitting within an inch at 20 yards everytime. Fixed blades were hitting perfect out to 70 yards until this weekend. Consistently getting 2-4" right at 70. There was an ever so slight left to right wind, about 3-5 mph and sometimes no wind and...
  11. General Archery Discussion
    Alright, so I spent last night until 1130 and another hour this morning getting my bow dialed in. I mainly was testing things last night but then I got everything set and got bareshaft hitting within an inch at 20 yards (I know not perfect but after 200+ arrows not sure if I could shoot better...
  12. Elite Archery Discussion
    So I have the cams sync'd perfectly, believe the center shot is spot on, I think nock height is good. I was shooting fletched pretty good through paper (6ft) but I keep getting this result with when I shoot bareshaft. This is from ~14 yards. I shot several times and same result. Am I looking at...
  13. PSE Archery Discussion
    Has anyone tried bareshaft tuning with the ECS? I've got my Evolve 35 shooting great with fletchings and yesterday I decided to shoot a few bareshaft to see how they fly... I was getting a knock low/left at 20 yards. Through paper at ~15 feet my bareshaft and fletched arrows both are shooting...
  14. General Archery Discussion
    I just got my new Prevail 37 with X3 cams and I have a 4" right tear at about 4-5 yards. I cannot do anything to get it to move it left in the least. RH shooter. 59#, 29 3/4" draw, 50-60# bow. "C" slot on cam. Top cam: parallel to string Bottom cam: very slightly toward riser Timing: both...
  15. General Archery Discussion
    Hello everyone, I have a bowtech RPM 360. I would like some advice regarding the bareshaft Tuning. I have done my paper tuning ( added one twist on the top and bottom left side yokes) then walk back tuning ( moved my rest 1/64 to the left), then creep tuning ( added one twist to the top buss...
  16. General Archery Discussion
    I have been shooting my ChillX with a QAD rest. The bow has tuned easily and bare shafts and fletched shoot together at 20yds with hardly any effort. Recently I put a blade rest with .008 blade on the bow. I set it the exact same distance from the riser as the QAD, and adjusted the blade so...
  17. Traditional Archery
    Hey guys, I got a question. I finally moved up from my 40# Shakespeare recurve to a 50# pse mustang. I draw 29 honest inches . I'm shooting full length 400 spine carbons with a 125 tip of the shelf and they fly great, except I shot one bareshaft and it curveballs to the left. I shoot 3 under...
  18. General Archery Discussion
    hey guys im literally about to give up my bow is driving me crazy. ill try and fill ya in best i can. been trying to tune bow for many many many hours for many many days. the thing that was giving me biggest trouble was getting nock high tear. finally got that fixed by adding nock set to bottom...
  19. General Archery Discussion
    I have been doing a fair amount of bareshaft tuning this week trying to work on some form flaws and to make sure I have the bow properly tuned and I have been having issues with one shaft hitting 3"-4" to the right of the others. It seems I am a slow learner because it took me until today to...
  20. Bow Tuning
    I've been trying to find a way to quickly set up a paper tuning station in my garage for when I'm trying to set up my center shot and nocking point. It has always seemed like the ideal way to get an honest idea of where your centershot & nock height should be. I have been concocting things in my...
1-20 of 23 Results
Top