Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 10 Results
  1. General Archery Discussion
    My 2012 omen pro creaks at about 2/3 of the way thru my draw, I know it is the rocker pins because I can loosen them, draw/let down and then tighten pins back up and it's good for 5-10 shots, then the annoying creak come back. I pressed and fully took everything apart this spring, greased and...
  2. Bow Tuning
    I have installed bomar stops on a 2014 dominator max when I put the bow on the draw board it was missing the stop on the top cam. Put a few twist in left yoke an took some out of the right. The top and bottom are know hitting dead center but there is now a little to much top cam lean to the...
  3. Bow Tuning
    I have just received my Bomar string stops for my Bowtech insanity CPXL. MY JBK strings should be here soon too then it is ready to retune. My question is: If I have a 29.25" draw length would I be better to set the stops and mods at 29" and over rotate the cams (lengthen string, shorten...
1-3 of 10 Results
Top