broadhead tuning

Before we get started, this not a complete tuning breakdown. Others will surely have different methods than I use. This is just what I do to get my bows tuned for broadheads. I had a plan this year to take the winner of the ArcheryTalk 2020 Hunting Bow Shootout into the woods with me this year...

Hi I recently had my bow paper tuned with field points. I put my broadhead on and its shooting left about 6-7 inches. I have a Mathews z7 exteme 70 lbs 29 in draw. Arrows are Easton Axis 5mm 300 spine with 75 grain insert and 150 grain 3 blade broadhead. I tried moving the arrow rest and when I...

I bought a 2018 React here on AT and am going through and tuning the bow (btw I am liking the bow so far). My question is what are the correct shims for top and bottom axles? Here is how I came to this scenario. I was having a bare shaft nock right tear, so I adjusted the shims to three thin...

I've been gearing up to pick some broadheads for my new setup and looking at those that I assume will "fly like a field point" (like a Ramcat). However, the more I read about broadhead tuning it seems to me that I should also purchase a set of broadheads that that don't look like they'll fly...

Does anyone know which practice blades fit the NAP Spitfire MAXX 100-gr.? Their website lists the 100/125 practice blades (model 60-238) under the standard Spitfire. And, there's no practice blade listed under the MAXX. I'm wondering if these practice blades fit the MAXX because it has a...

I've done some digging and can't find anything on a helical or offset broadhead. It seems generally accepted that for a 70# hunting rig with fixed blade broadheads that helical or offset vanes are the way to go and my experience matches. In listening to a mechanical vs fixed debate it was said...

Looking for experienced opinions on the Innerloc Carbon Tuner broadheads (both tuning experience, and field performance on whitetail). I will probably be shooting them on Maxima Red 350's. Haven't dropped the coin on arrows or the broadheads yet. Shooting a Destroyer 350, 29" DL, 65lb...

So I am at the broadhead tuning phase of tuning my bow and I need a little help with what to do. I am new to tuning so bare with me. I have paper tuned my bow and got almost a perfect bullet hole it had a very very small left and low tear. I left it there because I thought it looked good enough...

Okay, so we have paper tuning, bareshaft tuning, walkback tuning, broadhead tuning, radio tuning, etc. Do you just use whichever one it takes to get you shooting tight groups? Do you use them all? If so, do you have a specific order that you crank up the tunes? I'm just trying to figure out...

Need some opinions from those who know more than me: Do you guys think that if you tune a bow correctly that all broadheads should fly the same or that you have to tune the bow to match your broadhead? I'm split I keep reading on both sides. And if so what are your tips to broadhead tuning your...

Yesterday, after 4 hours of non-stop shooting my 65 lbs compound bow, trying to broadhead tune it, I realized 1- My arrows are underspined, even though they are according to the arrow manufacturers specs. (except for Carbon Express) 2- Mechanical broadheads don't necessarily fly like field...

After doing lots of research, watching videos, and reading many reviews...I have narrowed down my final list. Nothing against other broadheads but I'm only looking for feedback including warranties and customer service & pics or videos on these to help me decide without wasting money testing...

Hello all. Proud new owner of a Creed here. I got all my pins set to my field points and just started the broadhead tuning this morning. I got both flying on plane with each other as far as elevation goes. But when I aim at the dead center of my target my field point hits 2 inches dead left and...

Hello all. Proud new owner of a Creed here. I got all my pins set to my field points and just started the broadhead tuning this morning. I got both flying on plane with each other as far as elevation goes. But when I aim at the dead center of my target my field point hits 2 inches dead left and...

Hello all. Proud new owner of a Creed here. Got my pins all good on field points and I started to broadhead tune this morning. I got both flying on the same plane elevation wise, but when I aim dead at dead center of the target my field point hits 2 inches dead left and my broadhead hits 2...

I'm shooting an Insanity at 70lbs and have paper tuned and walk back tuned. Everything has been shooting great with field tips, but when trying many various broadheads, they are all CONSISTENTLY hitting 3 inches right of my field tips. I'm currently shooting Victory V-Force .300 arrows at 29.5...

My god, the season starts tommorow and now ive run into a weird problem. I have been shooting mechanicals and field tips all year (turkey season and practice) and the last week or so ive been working on tuning my bow so it will shoot broadheads perfectly. well my broadheads are flying spot on...

If you walkback tune your bow and adjust the rest until all is centered then when you broadhead tune you are moving your rest even more. So should you do one or the other or am I missing something?

I've been shooting my new bow for almost 1.5 years now and have become pretty acurate. I shoot 20-70 yards pretty often and feel good about my groups and accuracy. I recently started shooting broadheads and have been running into some issues. (I should be shooting better with them IMO) I looked...

Hoyt Maxis 35 AAE avalance rest 28 5/8" Easton full metal jacket 340 arrows broad heads tried all 125 gr. g5 striker slick trick mag muzzy mx3 gateway razr feathers, and 4in feathers Have paper tuned the setup to perfect bullet hole with field points, then walk back tuned the setup with field...