It's time for me to get another dozen A/C/Es (of a different spine this time) and I am getting some of the new 4mm components. I see the 4mm HL point is shorter (outside the shaft) than the older SS points. Can anyone tell me, please, exactly how long in millimeters the point part is? I don't...
I have 11 Easton Bloodline 330 spine 30.25” CTC. Arrows have the 75gr insert up front. 3 have brand new Lumenok Orange nocks, also have some Zingers (10 total). 6 are bare (the ones with zingers) 5 are fletched. They do not come with the case. Let me know if you have any questions - 110 TYD...
I recently made the change from 5mm axis 340s to 300s due to spine weakness concerns. Both arrow builds were setup identically other than spine difference. Cut 28.5”, 75 grain hit inserts, 100 grain points,10 grain IW collar, and 3 fletch aae max stealth vanes right helical. There was an obvious...
12 Easton axis arrows
27.25 carbon to carbon
Green Easton x nocks
Standard HIT inserts
2 pink and 1 green AAE Max stealth vanes Left helical
Arrows and fletching in great shape they have barely been shot.
Bought for my wife but she needs 600 spine.
I just built some 5mm, 250 spine FMJ's. The VPA footers I ordered were wayyy too big, so I pulled out the calipers and measured the OD of the arrow shaft and ID of the footer. Turns out the arrow shafts are 0.267 OD, but they're listed as 0.290 OD in Easton's chart. Has anyone else...
So I’ve shot Easton Axis 340’s before and I wanted more durability up front but not sacrificing weight. I’ve read online that the small Gold Tip ballistic collars fit great on my Axis’s. Tried em and boy let me tell ya, they group insane. I’m running the standard insert with an extra 13 grains...
9 Easton Carbon Injexion 280 currently have an ethics archery insert/outsert system. Currently 29 5/8” from front of outsert to throat of nock. Not sure on carbon to carbon as I can’t see underneath the sleeve. As they sit, these are heavy hitting arrows with stainless insert/outsert approx. 590...
20 Easton 330 carbon Injexion all currently cut to 28 3/16” (carbon to carbon) all but 3 of them have firenock aero-outserts installed. These make them 29inch from end of outsert to the throat of nock.
(13 4-fletch helical aae max ≈2.75”)
(3 4-fletch offset fusion x-II ≈2.6”)
I have the following nocks for sale. Most if not all of them are brand new. A few are take off's from new shafts. All in excellent condition.
S nocks, green. Qty 36. $20 TYD
H Nocks, white Qty 48. $25 TYD
13 EASTON FMJ 400 SPINE 10.3 GP1 ARROWS, HIIT INSERTS INSTALLED. SOME ARE MISSING NOCKS/FLETCHINGS. ALL OTHERS FLETCHED ARE QUICK FLETCH THREE INCH FLETCHINGS. NO BENDS OR STRUCTURAL DAMAGE.
$100.00 TYD-PAYPAL PREFERRED
I'm newish to archery again and after getting into higher quality arrows this last summer, I finally landed on shooting Easton Axis. The set I had I've shot so much, the fletchings are warped, the paint has worn off, and they just seem rough. So I ordered a half dozen from my local shop- not...
Selling a target stabilizer that I no longer use. It is 30" long and the brand is unknown. It is in very good used condition
and is very unique as it has a moveable side weight on the shaft to tune the stabilizer to your own personal shot characteristics. It is very nice and well built ...
For sale are 12 Easton Bloodline 400 Spine arrows. These have never been hunted with, only shot into targets. 9 are in perfect condition ready to go and 3 are missing a single vane.
Carbon to nock: 28.5"
Arrow Weight: 259 grains
I'm looking to get $60 OBO TYD (CON US)...