Archery Talk Forum banner
insert
1-19 of 22 Results
  1. Arrows, Broadheads, Quivers and Arrow Components
    Up for grabs is a dozen like new 35 Grain Victory Shok Aluminum Outsert for VAP TKO 300 shafts. Asking only $10 TYD for the lower 48. You pay fees.
  2. Want to buy or trade? WTB or WTT.
    I have 12 of the Victory VAP Shok Taper Lock Insert - ACISHOKVMS (insert SHOK TL VAP 234 ME). I purchased these from Lancaster Archery. The image matches what I have for the RIP Shok Insert for TKO .204 arrows. Unfortunately, these inserts are too narrow for my arrows. I want to buy or trade...
  3. General Archery Discussion
    I just ordered some black eagle X-Impact arrows and I'm looking for some nock collars or bushings. I will be shooting the Micro M nock that came with arrows. I only see the pin bushings listed on BE website for the pin nocks. Any recommendations would be appreciated. Thanks 400 spine ID .165"...
  4. Sights, scopes, stabilizers and dampeners
    Selling as lot, but can split dampeners/stab (as a lot), white insert, and Treelimb mount separately. Larger dampener bodies are all 3/8”. Stabilizer is the heavy, not lite. These are extras from an HTR project. $60 for all tyd Dampeners/stab lot $25 tyd White insert $10 Grip $25 tyd...
  5. Arrows, Broadheads, Quivers and Arrow Components
    Brand New Pack of 12 Ordered the wrong item (Needed Deep Six) and can't return $10 TYD
  6. Traditional Archery
    Good Morning All, So my last post we figured out how to make the field tips fit flush with the shaft, I just have go file the field point, BUT then realized it is actually the beman inserts that hang over the shaft a little bit causing the arrow to catch when pulling out of a target causing...
  7. General Archery Discussion
    I just did an FOC calculation on my setup for the first time. I am getting something like 7.5%. I am not concerned about this with regard to penetration. I am getting 75 ft -lbs KE and have gotten pass throughs on every animal with this setup. I am trying to extend my effective shooting...
  8. General Archery Discussion
    I am building some new target arrows and planned to use hot melt (blue-low heat) for the points initially until I confirm my point weight is right. Then I would want to epoxy them in. How would you prep the shaft to remove all the old hot melt before using the epoxy for a permanent fixation?
  9. General Archery Discussion
    Hi, I'm shooting a Hoyt Defiant 30, 66–68 pound draw weight (depending on the scale), 27 1/2" draw length, and I'm wondering what spine and length Easton Axis shafts and inserts the people here would recommend. I'm figuring a 340 spine with 100 grain heads and a heavier insert than the standard...
  10. General Archery Discussion
    I see a lot of people are putting "components" into their arrows now as in weighted brass inserts from 20 grains - 70 grains. What exactly is the purpose? Is it a FOC thing or what? A normal insert weighs about 12 grains and then you have your tip of 100 grains, if you want heavier then why not...
  11. Traditional Archery
    Researching new arrows, and I had some questions so I called Gold Tip. I had been considering screw-in tips with inserts in a 700 spine Ultralight, but the gentleman I spoke to steered me in the direction of their glue-in points when I told him I was doing target and field archery (and a little...
  12. General Archery Discussion
    I've been shooting Maxima hunters with an FOC of about 8%. I would rather keep my 100gr. points, but I am debating changing my inserts from the factory 11gr. ones to brass 50gr. ones. How much of a difference would this make, and is it worth it?
  13. Arrows, Broadheads, Quivers and Arrow Components
    For Sale: BNIP Victory VAP Accessories VAP Bushings - 12 pack VAP 5/16 Inserts $20 tyd
  14. Arrows, Broadheads, Quivers and Arrow Components
    Easton ION shafts. Brand new, still in factory bag, uncut, with pink nocks. Includes inserts (also in the factory bag). 500 spine bare shaft. Asking $95tyd. Money Order preferred, but will take PayPal (gift or add 4%). Thanks.
  15. General Archery Discussion
    Has anyone tried the NEW Loctite GO2 Hybrid Glue for Arrow inserts or fletching yet? I just Noticed a New glue at Walmart today from Loctite called GO2 GLUE. There were several things that really got my attention about this glue. Number one, SHOCK RESISTANCE. I have had very poor results...
  16. Traditional Archery
    Hey guys, Gotta question. I am shooting 2117 aluminum arrows out of my recurve and wanted to know if there are any particular inserts with optional/adjustable weights that you can recommend. I am wanting to stick with 100gr broad heads since that is what my other bows are using. I want to be...
  17. General Archery Discussion
    Hey guys, Gotta question. I am shooting 2117 aluminum arrows out of my recurve and wanted to know if there are any particular inserts with optional/adjustable weights that you can recommend. I am wanting to stick with 100gr broad heads since that is what my other bows are using. I want to be...
  18. General Archery Discussion
    Are there any inserts that are lighter than the standard HP inserts that would fit correctly into an Easton ST Epic 300 spine shaft? I've heard that an A/C/C 3-49 fits into the 400 and 500 epic spines, but I'm looking for something for the 300 and 340 spined arrows. Can someone help with this?
  19. Arrows & Strings
    Hi Guys (and Gals), I'm new to this forum but have read many of your postings with great interest. I have just bought some PDP aluminium point inserts and some uni-bushings (size 2315-7-2419) for my 2317 aluminium arrows. The outside diameter of the inserts etc is approx 0.335". The inside...
1-19 of 22 Results
Top