Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. General Archery Discussion
    Bow: 1st Gen Mathews TRX 38 57 pounds at 29.5 inches. Issue: After about 1000 shots, the d loop starts rotating to the point where I have to rotate the knots back inline with the peep, ( this is not a peep rotation issue) otherwise it misaligns the peep during draw. However, it takes real...
  2. General Archery Discussion
    Wanted to see if anyones seen this and what’s the fix? Bought this off here few weeks back got around to shooting it today with my 80lb Rx-7 and third shot release popped smacked myself in the mouth. I thought it may be adjustment or I accidentally hit trigger but nope. Tried a second time same...
  3. PSE Archery Discussion
    HI ! I have a perform X , it was working fine till suddenly the top right limb begin to flex really bad , to the point that the cable touch the cam and begin to cut itself. The draw stops don't touch the cable , not even a little , if I continue pulling the string gets off the cam. I ask for a...
  4. General Archery Discussion
    I just bought all new equipment. The tek target sight site tape doesn't fit. I went through the whole posses a few times adjusting to get the tape to fit. The bar is all the way in on its closest setting and the garge is still not indicating a tape to use. I shoot a lower poundage because I have...
  5. G5 / Prime Archery Discussion
    I have a few questions regarding to my Alloy. Question#1. My alloy uses 60lbs limb. However, when I measured the peak weight on full setting, it came out to be 57lbs only. For the record, my cams are in tune (half hole under). The A-A is set to 33.1875" (spec should be 33.2"-33.3") so I...
  6. General Archery Discussion
    So I just took my first stab at fletching my own arrows and I think I did a pretty good job overall. I was using an Arizona E-Z Fletch Mini, Black Blazer Vanes and Loctite Gel Control. My first two attempts are abysmal and I burned through 12 vanes but I got the hang of it shortly after. I did...
  7. General Archery Discussion
    How's it going everyone? So I know we all love archery but are there ever any issues that you wish you could fix? Anything a part of the process of going to a range or setting up that you find sort of bothersome?
  8. General Archery Discussion
    Replaced my nock loop today just as the old one was set. 10 and 20 yard shots are really close but at 30 and 40 they are off around 3-4". I made sure it was tied correctly and it's set exactly as my old one. Is this normal and should I just do a bit of adjusting or is something wrong here...
  9. Bowtech Archery Discussion
    I have the rest installed, but for some reason when I draw back, the rest does not lift as much as it seems it should for clearance. I have the limb mount as close to the cams as possible, which is where they should be flexing the most right? Anyone have any pointers? If its needed, I can post...
  10. F.I.T.A, N.A.A., Collegiate Archery, And J.O.A.D.
    I noticed that both of these washers on the back of the limb bolt head had fallen off during California Collegiate Championships this weekend. Worse yet, one of them became lodged in between the black part of the bolt head and the actual limb fork, causing a nasty circular indentation in the...
  11. Bow Tuning
    My god, the season starts tommorow and now ive run into a weird problem. I have been shooting mechanicals and field tips all year (turkey season and practice) and the last week or so ive been working on tuning my bow so it will shoot broadheads perfectly. well my broadheads are flying spot on...
  12. WELCOME! New User Forum
    Hi, I am based in the UK and I am wondering if anyone in the States have a similar problem. I bought hoyt matrix with RKT cams approx six week ago and I noticed a paint blister appear and then crack around the edge of the blister exposing a creamy coloured edge. Based in the UK I contacted the...
  13. Bow Tuning
    I have an issue with my Maxxis 35. I'm usally a 28 in draw but when buying this Maxxis I didn't realize until doing some research that it has cam #3 XTR which isn't set up for a 28 in draw. Currently it's set up on B on the cam which is 29.5 if I'm not mistaking. I'm still fresh to the bow...
1-13 of 13 Results
Top