length

Hello, complete novice to archery here. So, I just bought a 56" wooden recurve bow at a thrift shop that didn't come with a string, has no markings indicating what string is needed or what the draw weight it is, and now need to know what (actual) length of string to get for it. I have a 50"...

No more scrounging trying to find a rest screw long enough or a sight or quiver screw long enough or short enough. It wasn't cheap, but I stocked up on screws. I found myself wasting too much time looking for bolts the length I needed. It seemed like every rest or sight I picked up lately...

I am building a PVC crossbow with a wooden stock. I am using a partially formed stock from a larger project that didn't work out, and I am planning on cutting it down to a smaller stock. The question I have is, what should the general relation be between the bolt length, the groove length and...

I just traded a guy for a Prime Impact. Rightnow it has PCX #1 cams. I need #3 or #4. Is also like to go to the PCXL cam. Please let me know what you have.

My friend wants a carbon rose bow but she has a 28" draw length and the carbon rose advertises a max 27" draw length. If I take some twist out of the string and cables, can I get the bow to perform reliably at 28" of draw length, or is it not possible to squeeze 28" out of this bow?

Hello. I've been trying to find the string and cable/s length for my 02 cybertec xt2000 with versacammm 2 and dual track idler. Their time charts don't have the set up for this cam. 60-70lb 27.5-29 DL. Thanks for any info.

I have a Bowtech 101st Airborne and it has a brace height of 7 1/4 (7.25) and ATA 36 1/4 and I just purchased a Bowtech BOSS with a brace height of 7 and ATA of 36. With the brace height being 1/4 (.25) inches shorter on the BOSS and the ATA being 1/4 inches shorter, I would think the arrow...

Hey guys/gals, I've had my OB Evolution for about 2 months now and put a few hundred shots through it, great bow. Now that I feel that I have broke in the strings I have decided to check all the measurements, timing, etc. and all except the ATA seem to be within spec. I know that this is a...

Hi guys this is my first post so sorry if I've done something wrong! Anyway I like to have projects and always loved archery, in theory lol dad never trusted me with anything sharper than a sponge and since leaving home I've been skint and popping out kids with the wife so money has never been...

Howdy out there, Prolly a stupid question but I'm no string builder (I can serve a peep in like a madman when necessary) and I'm trying to give the best info I can to a string builder on eBay (Nearest pro-shop is 100 miles away). Alpine's tune charts list the string and buss cable lengths for...

Hey Everybody, Since no bow shops carry Easton around me, I will be ordering a dozen FMJ Deep Six Injexions 330's from Lancaster and want to get them pre-cut. My biggest concern is getting them cut too short and not be spined correctly. My current setup is an Elite E35 29/70, a QAD Ultra Rest...

Since Darton removed the string chart from their website, I thought I would try to save folks the trouble I went through looking for Darton string length specsl 1999 to 2011 string length specs are listed in this chart: http://www.redhawk-archery.com/redhawkstrings/techinfo/Darton.pdf

I'm going to upgrade my stab set later on this year and I'm wondering what's a good length to get for the side rods. I currently have 30" long rod and 10" side rods. Would upgrading side rods to 12" show significant changes or just stick with 10"?

Hi, I'm currently shooting a 2012 PSE Supra Max bow (with Hybrid Cam). My bow has a 45# Draw weight, 7" brace height, 320fps and a 27" Draw length. I just want to know what would be the correct arrow length, size or spine I should be using as my shaft and what point weight I should putting on...

My draw length is about 27" so I was thinking about a 27" riser with short limbs. Right now I shoot a 25" riser with medium limbs. I was thinking that this will make the bow faster at the same poundage. And that I have a short enough draw for the short limbs.

My buddy has on older PSE and i have no idea what it is. Im trying to figure out a name and cable length. I looked all day long online and somehow cant find it. The sticker on the bottom limb says: SN-0219399 DL-30 DW- 70-80 Cable Tune-2930 String Length-56.5 Min Grain Arrow-480 I tried...

Hey guys, I have a question I'm hoping y'all can help me out with. I have an '08 GT500 that is in need of new strings and cables. The bow is 70# with #2 cuda cams for my 26.5" draw length. I looked through elites tuning charts for the lengths of my string/cables. The thing I am running into is...

Hey all, my old PSE is missing its specifications sticker on the lower limb. Only a tiny piece remains... I found the information I needed but is there a company that makes a generic sticker that I can personally fill in the specs (draw length, weight, string/cable length, ect.) for future use...

Hunting Whitetails only w/ Muzzy 3-blade/100gr Hoyt Spyder 30 @ 28.5"/55lb QAD Ultrarest Hunter Pictured is a 29" Cabelas Stalker Xtreme 400 55/70 8.5gpi that I was previously shooting out of my Bear Charge. I'm thinking of buying some Easton A/C/C Pro Hunters 440 8.5gpi for the new Hoyt, and...

Although I have seen discussions about node points relative to the arrow rest by Easton and in classic archery texts, what is really known about optimal arrow length? Obviously a shorter arrow is lighter and has less wind resistance both in forward and lateral directions, but for short distance...