Archery Talk Forum banner
mathews v3
1-20 of 20 Results
  1. Bowhunting and Bowhunter Showcases
    I've had a chance to set up and test out the brand new Mathews V3X 29 and figured I'd share my first impressions of the bow with you. There is some interesting new technology included in this bow, highlighted by the Bridge-Lock sight technology. This design allows you to install a...
  2. Bowhunting and Bowhunter Showcases
    Testing bows in 2021 has been a bit of a challenge for me, due to club closures and supply chain issues for some of the manufacturers, but after some delays it is finally time for the 2021 Hunting Bow Shootout. The contenders this year, listed in the order they arrived, are the Mathews V3 31...
  3. Bowhunting and Bowhunter Showcases
    I have had the opportunity to shoot the Mathews V3 31 for months to prepare for this long-term review video, which is embedded below. And while it looks similar to recent Mathews bows, it has a few notable differences. First, let’s start with the specs. The V3 31, as the name implies, has an...
  4. Hunting Bows
    Mathews V3 Loaded $1300 Bare Bow $975 Mathews V3 in Under Armour Camo riser and limbs. Currently set at 70# with 30” B Mods at 85% let off. Great condition. Only mark I could find is a small ding on the corner of the limb pocket. It doesn’t effect shooting in anyway. It is purely cosmetic...
  5. Mathews Archery Discussion
    Does anyone have any idea of a decent hard case that isn't too pricey for the V3 31? Preferably something that has a little extra room for arrows, quiver, etc.
  6. Want to buy (WTB) or Want to trade (WTT) Bows?
    Wanting to trade my Mathews V3 31 for a PSE EVO EVL, you would have to add $$ on top (Bare bow for Bare Bow). Has only been shot maybe 150 times at the range. It has 28" 65# mods Has been professionally tuned Bloodline VEC99 custom strings and cable (Never need to be waxed) Ultraview...
  7. Hunting Bows
    Wanting to sell my Mathews V3, bow is in amazing shape and has only ever seen a static field. Has only been shot maybe 150 times at the range. It has 28" 70# 80% let-off mods (I can most likely get the mod you need, V3 mods can change Draw weight and Length) Cams have been professionally...
  8. Hunting Bows
    Bought a super nice Mathews Traverse EVII finish 70# to shoot along side my 60# model. Not sure the extra poundage is going to work for me on long sits in the cold weather, so I am going to sell this one. Sale will be for bow with tuned QAD HDX, peep,loop, *sight pictured is not included...
  9. Bow Tuning
    Hi, I’m new here and actually posting for a buddy. Not sure if I’m in the correct category to post this or not. My buddy just purchased a V3 and a spot hog fast Eddie 3 pin slider. We had the sight and a qad rest thrown on it at the pro shop he bought it from. I don’t believe it was tuned...
  10. General Archery Discussion
    An expensive week, I purchased a couple bows, an EVL EVO 34 and a Mathews v3 31. I know in shops you can be swayed by whoever is showing you the bow. On top of that, very few bows are actually set to the correct poundage, draw, cam timing, ideal rests... etc.. Nothing against pro shops, I just...
  11. Mathews Archery Discussion
    Hi All, Decided to pull the trigger on a V3 27 and i was looking to get some insight into what accessories i need to be getting and was hoping some Mathews aficionados on this sub forum could jump in with their expertise. I use a Stan SX3 release and my CBE Engage Hybrid 3 Pin arrives tomorrow...
  12. Mathews Archery Discussion
    Hey guys, just wondering how long peoples arrows are for a v3 at 29.5 draw?
  13. General Archery Discussion
    For the guys with shorter draw lengths that may have shot both, which one did you like better? I'm in between a 26.5" and a 27" draw depending on which bow I shoot. Two things: draw cycle is the least important factor to me, and I would shoot the BT on performance. Thanks for any input.
  14. General Archery Discussion
    Whenever I move the main fletching to the top, you can see that I have clearance issues on the right. If I turn the main fletching to the left, I have clearance issues from the bottom fletching. Any ideas on what I can do here? Mathews V3
  15. Mathews Archery Discussion
    The first question I got asked when the new Mathews V3 models came out was how do they compare to last year's VXR models. While there are some notable differences in the design of the V3 and VXR (cable rod, riser length the most notable), the end result for the user is a remarkable similar...
  16. General Archery Discussion
    After a lengthy amount of time and talking back and forth, I was able to get BassPro to buy me a new bow! It may not be a Hoyt, but I got a 2021 Mathews V3 31! Thank you all for the suggestions! Without you guys, I may not of had this right now. This saga has come to an end, we did it!
  17. Mathews Archery Discussion
    Now that I've had a chance to set up both the Mathews V3 27 and 31 and put a couple hundred arrows through them, I figured I'd share my first impressions with all of you. I also ran both bows through the chronograph. Both bows were dialed in at 70 pounds and both are set with 29.5-inch draw...
  18. Hunting Bows
    For sale is a Hoyt rx3 in storm #3 cam 60-70 pound right handed.This bow is practically brand new with no scratches or signs of wear. This is my backup bow and time to sell because I rarely shoot it. The bow has not been registered. The strings on it are a custom set of gas high octane hundred...
  19. General Archery Discussion
    I am being a little indecisive on picking a new arrow rest for my 27” Mathews V3. I’m torn between the hamskea trinity, QAD integrated mx, and the vapor trail gen 7x. I’ve shot a vtrail for some time now. Thinking of maybe switching it up. What are your thoughts on rests???
  20. Bowhunting and Bowhunter Showcases
    Yesterday the Big Brown Truck dropped off a pair of new bows from Mathews - the V3 27 and V3 31. I will follow up with speed tests and a review in the coming weeks, but I figured I'd share my first look at these bows with you with a video that shows my unboxing as well as goes over the new...
1-20 of 20 Results
Top