Archery Talk Forum banner
paper tune
1-16 of 16 Results
  1. General Archery Discussion
    Hey guys recently picked up a VXR and a dozen of 300 spine match grade axis arrows cut at 27” with 150g at the front and an overall weight of around 465-470g. When I went to paper tune the bow at 62ish # it was tearing left. After moving the rest as far into the riser as possible it kept tearing...
  2. General Archery Discussion
    2 weeks ago i had my #60 limbs swapped for #70 limbs. got the bow back home and realized the rest had got bumped at some point since spring and was no longer on level. took it to bow shop to get rest adjusted and paper tuned. now the bow will not tune whatsoever unless the rest is about a 1/8...
  3. Elite Archery Discussion
    Hello all, I am just starting to tune a 2015 Left Handed Elite Victory 39. 30" Draw, 62#, rest @ 13/16", center of arrow through center of berger. I am bareshaft tuning Gold Tip nine.3, 30.25" c2c, 130gn point, GTO bushing and nock. I am having a 3" tail right tear @ 15 feet. I have adjusted...
  4. General Archery Discussion
    Shooting at Chill R at #70 (to start), 29" draw, QAD rest Trying to paper tune the bow using Carbon Express Maxima Hunter 340 spine with 125 grain tip. Started shooting and was getting a left tear (point right, tail left), moved the rest twords the riser and same results.. Lowered poundage one...
  5. General Archery Discussion
    Archers, I set my center shot up with an Easy Eye Eze-Center Laser, then went directly to paper tuning the bow. From everything I have read, if I have a right tear (I have a right tear) I need to adjust my rest to the left to correct for it. I was able to eliminate the right tear and shoot...
  6. Bowhunting and Bowhunter Showcases
    Okay, so we have paper tuning, bareshaft tuning, walkback tuning, broadhead tuning, radio tuning, etc. Do you just use whichever one it takes to get you shooting tight groups? Do you use them all? If so, do you have a specific order that you crank up the tunes? I'm just trying to figure out...
  7. Canadian Forum
    Hey, I'm new to this, I was wondering if there are any good places in the GTA (Ontario) to bring my Hoyt Charger to get it tuned for a decent price. I would love to hear your experiences with any shops or who are your go to shops!
  8. General Archery Discussion
    I set up my bow with a new QAD LD rest, re-fletched my arrows and tied on a new d-loop and peep sight. I can not for the life of me get the "bullet hole" I usually never have this problem. It is getting a "tail low tear". I've moved my nock up in small increments and it got a lot better going...
  9. Bow Tuning
    I'm looking for some insight into why, when my son shoots his bow, the arrow flight is visibly porpoising on the way to the target. It's not something I can see within 10 yards, but at 20 yards, it's easy to visualize with the naked eye. He is shooting a Youth Barnett Vortex set at 35 lbs. Of...
  10. General Archery Discussion
    Good Morning All, I just got back into archery after a 10 year break, college and paying for it kind of got in the way. I jumped back in with tons of enthusiasm and purchased a Hoyt Faktor 30 (black) based off of recommendations I found on here, and shooting one at my local archery shop. So...
  11. Hoyt Archery Discussion
    I put a new NAP Apache drop away on my charger. I got it set up and then walk back tuned it. It was shooting good so i decided i would paper tune it. It was shooting with a pretty big tear to the left. I can only move rest so far right until it hits riser on bow and if i move it to where it was...
  12. General Archery Discussion
    Ok guys I've probably shot 50 arrows just into this "paper tuning". I can't get it. No matter what I do I get a tear with the vanes about an inch to two inches right of the tip. I've been watching videos on it all the time and today I went to try it again hoping to get better accuracy and...
  13. General Archery Discussion
    Hello, I'm looking for someone who succeed to proceed to Paper Tune with arrow fletched with Feather vanes (like Gateway ones). For my tests I got only a single hole without the 3 vanes pattern, while using plastic vanes I can get the traditional patterns and proceed to adjustement of my...
  14. Bow Tuning
    hi guys. Been a while since i have posted on here due to an awesome hunting season, but 3D is due to begin for me soon and Im having some tuning issues. I'm shooting a 2010 Martin Shadowcat (binary system) and am consistently getting a high and right tear on paper. I am shooting from roughly six...
  15. Bow Tuning
    I bought a PSE Vendetta XS a few years back and now I am having tuning issues. I keep getting a tail high on the paper tune (3/4"). I use a WB rest that is set a tad higher than the nock already, so it is not a high nock issue. I think it might be a cam synchronize issue, but the sync marks on...
  16. General Archery Discussion
    I shoot threw paper at 4-6 feet away, look at tear and make adjustments. Now the part that fustrates me is when having to move the nock and d-loop up or down. How do you guys do it? I usually do the following: *cut off d-loop, *get nock pliers out and open nock, *move nock accordingly, *re-tie...
1-16 of 16 Results
Top