Archery Talk Forum banner

paper

  1. PSE X-Force GX – One of the easiest to tune PSE bows that many could not tune. WHY?

    General Archery Discussion
    NOTE: For those that don't believe in paper tuning, I'm not going to argue with you. Find a paper tuning thread to make your argument against paper tuning. This thread is for those that want to paper tune their X-Force GX. I've collected a few PSE XF GX's over the years when I found a bow or...
  2. hello, compound tuning question

    Broadhead Discussion
    Hi there, Ive been reading the posts here for about 2 years, so I figured i would join, seems like the best place for tuning knowledge. I shot traditional longbows as a kid in the backyard growing up, a lot. In 2016 I bought a compound because there was a range near my house, the Redwood...
  3. Paper Tear Help - Hoyt Carbon Defiant Turbo

    General Archery Discussion
    Just received a new Hoyt Carbon Defiant Turbo and after leaving it with a local dealer for 3 days, they got it in tune as best they could. Curious if someone on AT can help determine corrective action for this particular tear (bottom 3 tears)? The bottom cam has some lean that they just...
  4. Tuning Problems

    General Archery Discussion
    Hey, looking for some advice. I am shooting a Mathew's Chill X. I have two Chill Xs, one i had no problem tuning and the other has given me nothing but trouble. I am getting right tears. From what i have seen here on AT there seems to be many others with the same problem. Now i tried all of...
  5. Very confusing paper tune. What the heck is going on here??

    Bow Tuning
    My setup: Hoyt Ultratec XT2000VC 2001 or 2002 Model (single cam, but it has seperate buss and control cables... is there any other cams that do this? Its a Versacam) pg 18-20 shows the versa cam http://www.hoyt.com/assets/downloads/manuals/2002_Compound_Manual.pdf 65% letoff Draw weight...
  6. Tuning my Triumph + Cool Paper Tuning Station Idea

    Bow Tuning
    I've been trying to find a way to quickly set up a paper tuning station in my garage for when I'm trying to set up my center shot and nocking point. It has always seemed like the ideal way to get an honest idea of where your centershot & nock height should be. I have been concocting things in my...
  7. Cable and string twisting question

    Bow Tuning
    Paper tuning my anarchy yesterday was a bit of a headache. I'm getting bullet holes now but with my arrow nock 1/4" high. This caused some fletching contact on my QAD HDX so I had to do a quarter turn on my nocks. I took some measurements and the ATA on my bow is 1/4" longer than spec. I'm...
  8. PVC Paper Tuner Stand

    DIY Equipment
    I'm sure plenty of these have been made and are on here but here's mine. I spent under $10 on the pipe and around $6 on the roll of paper from a local school supply store. It took less than 30 minutes to build. It works great.
  9. My 20 dollar paper tuning stand!!!!

    DIY Equipment
    Materials From Lowe's: 3-2"x4"x8'/ about $10 1-small box of 3" deck screws/ about $10 (p.s. that's freakin ridiculous for screws i mean come on) 1-1and1/4"x2' wooden rod (had this laying around) We used every bit of wood. There was no waste except for the corners that were left after cutting...
  10. Which Hoyt Target/All Rounder Bow

    General Archery Discussion
    Hey guys, which bow to get? :D Just kidding. I've done a ton of research and have shot around at my local shop so I'm not asking completely blind here. I think that my question hasn't quite been covered before so going to go ahead and start a new thread. I'm newer to compound bow archery...
  11. Paper target. saw this on instructables!

    DIY Equipment
    hey all, saw this on instructables http://www.instructables.com/id/DIY-Archery-Target-used-A4-sized-papers/step9/Shooting-the-darn-thing/ was thinking of the same idea, but use old phone books and ratchet straps to sinch things down. not sure how well it would work or if the arrows would even...
  12. Paper Tune & Side bar

    Bow Tuning
    Hi, I´m having problems tunning my bow. I made a paper tuning with just the front stabilizer getting an almost perfect bullet hole. but when I put a short side bar is imposible to get the bow tunned, all i get is a left tear on the paper. I can use the bow without the side bar but the bow is...
  13. Source for paper 3D practice targets

    General Archery Discussion
    I am looking for a source (free or otherwise) for paper 3D practice targets. I would like paper targets of the scoring zones for 3D targets. Printable targets would be great but will purchase if a decent price. Any help will be appreciated.
  14. 2006 Hoyt Proelite XT2000 Limbs and accessories

    Target Bows
    I have a beautiful 29" Hoyt Proelite from 2006 with XT2000 limbs and quicktune arrow rest. It has 50-60# draw and Cam & 1/2. Red and black body, negligible wear above berger hole. Only shot for 6 months for UCLA's Club Archery team paper target shooting, just graduated and need money. I will...
  15. centershot, how far out is too far out

    General Archery Discussion
    Hey guys, I just got my new alphamax 32 and ripcord rest set up and paper To get bullet holes at six feet, I had to move the center of the rest a full inch from the riser. It looks a little too far out to me, is this normal? If it's not, what is the fix? I had been getting a consistant right...
Top