Archery Talk Forum banner

repair

  1. Looking for PSE Parts

    General Archery Discussion
    Hi I am new to the forums here. I have just acquired a bow from my father that is 11 years old according to the people at PSE. Since it is that old they no longer carry parts for the bow. I am looking for the Camd on the bow the serial number is 0860656. The model is a Mach 8. Please contact me...
  2. Barnett Demon

    Crossbow Forum - General Crossbow Discussion
    So, apparently my coworker has the best luck at finding "new-to-me" equipment in the worst condition with no easy options for repair. He has a question to ask anyone who might have an idea. He recently got a Barnett Demon Crossbow about a week ago and both cams are cracked to the point of...
  3. Crossbow Limb Joint Problem

    Crossbow Forum - General Crossbow Discussion
    So I was out hunting and happened to look at the bottom of my bow (Horton Explorer 150) where the limbs connect to the bow. The plastic pieces there are all broken and I'm wondering if I should be concerned about this? Anyone have any thoughts or suggestions? I don't really want to buy a whole...
  4. Broken Cam for Easter

    General Archery Discussion
    I opened bow case today to find that my string had popped in the case overnight. Upon further inspection I found that the point where my cable string attaches (bottom cam) bent out of place undoing the treading and causing the sting to break. The bow is a Compound Genio 7 W&W with Shadow limbs...
  5. New Parker authorized repair center (near Charlotte, NC)

    Parker Crossbow Discussion
    Hey all, just letting you know that BOSS Archery in Concord, North Carolina (near Charlotte) is now a Parker authorized repair center. The factory certified techs will work on anything you need. We have official strings, dampeners, suppressors, quiver mounts, arrows, cheek rests, pistol grips...
  6. NASP arrow repair question

    Arrows & Strings
    Hi folks, I've got some NASP Genesis v2 xx75 / 1820 arrows that need points replaced. Can someone recommend the fastest and easiest way to remove the old points? I'd like to do it without damaging a shaft. The parent volunteer who is pulling his hair out would greatly appreciate some advice. :)...
  7. Issue replacing cable

    General Archery Discussion
    Hey there, I don't have good access to a bow shop anymore and recently purchased a new set of strings for my Martin Cheetah 2009 with M2 cams. I watched Drave's method of replacing strings using an Allen wrench to hold the cam while replacing either string or cable. I understand this is probably...
  8. "Partially" Dry Fired New Crossbow-- Advice!

    Crossbow Forum - General Crossbow Discussion
    Okay so first post here on AT (best forum for bow info by far). So to the point: I just bought my first crossbow this past weekend, took it out to shoot for the first time this evening since purchase. I left my rope cocking device in the house so I figured I'd take the easy way out and pull it...
  9. Bow Repair

    General Archery Discussion
    Hey, I recently came into possession of a bow from my Dad. He used to use it back when my Mum and him were newly married and hunted for some of their food. This bow was largely ignored after they had children and moved into the city, but now it's screaming at us to see if we can do anything...
  10. Horton repair parts?

    Crossbow Forum - General Crossbow Discussion
    I've got a Horton Dakota SL that's got some hairline cracks in the limbs. Need to find replacement limbs or bow assembly. Anyone got suggestions on an online site for parts? How about bow repair in North Central Arkansas? Any help is appreciated. Thanks.
  11. Used bow repair help

    Traditional Archery
    I just bought my first adult bow, a used bow from eBay, and it looked fine. Nice blond and dark wood recurve, 45#@28" with string. Tested the weight, and it felt like a 45# bow to me, was able to draw it fine. I was practicing my draw every day, pulling to full draw and letting it back to rest...
  12. anyone ever try truball repair service?

    General Archery Discussion
    let me start off by saying it is totally my fault that my axcel amortech sight is screwed up, i was tring to change my pin colors and everything that could go wrong did, so now i gotta replace 2 of my pins which looks like it could also turn into a night mare. i was wondering if anybody ever...
  13. Nite Hawk press for Crossbows

    Crossbow Forum - General Crossbow Discussion
    Check out the video demonstration of pressing a crossbow with the Nite Hawk bow press. www.nitehawkarchery.com. Its listed in the press releases.
  14. Portable Press Now Presses Crossbows

    Manufacturer Announcements and Press Releases
    The Nite Hawk Press now presses crossbows. To the many who have been waiting for a press they can use to safely to maintain their cross bow the wait is over. It actually has happened! If you go to our web site, www.nitehawkarchery.com you can see a demonstration of how easy it is to press your...
  15. 08 diamond marquis cam

    Bow Tuning
    Hi, I had a problem with my bow a couple of weeks ago. While changing the string, I deformed the cam with the portable bow press. Unfortunately, I was forcing the plate of the cam, resulting in a massive deformation. I live in Spain, and I don't have a pro shop close by, so I contacted directly...
Top