Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Want to buy or trade? WTB or WTT.
    I'm looking for 0.010" shims for a 3/16" axle (Elite Ritual 35). I will buy a shim kit as a last resort, but I would rather buy only the shims I need. Please let me know if you have any 0.010" shims you aren't using and would like to sell.
  2. General Archery Discussion
    Got my new ventum 30 last week, 5/12. First of all, I love it, the draw is really smooth. I can't say enough good things about this bow. There are some things I am confused about with the bow and what the shop owner said when I bought it. When I started shooting I noticed some cam lean in both...
  3. PSE Archery Discussion
    I bought a 2018 React here on AT and am going through and tuning the bow (btw I am liking the bow so far). My question is what are the correct shims for top and bottom axles? Here is how I came to this scenario. I was having a bare shaft nock right tear, so I adjusted the shims to three thin...
  4. Hoyt Archery Discussion
    I was hoping someone would know the shim total for hyperedge #1 cam.
  5. General Archery Discussion
    Anyone know the correct size spacers for the Pro Defiant #3 cam bottom. I have read on here in the past that they are typically two different sizes/different colors on other models. My bottom cam has two black spacers that look exactly the same size. Also, only one side has a fiber washer...
  6. Elite Archery Discussion
    I am new to elites so the shimming thing is new to me. I just bought an i31 and I watched the bow tech set it up and to get it to paper tune a fletched arrow he switched the thick and thin shims around on the top axle but not the bottom, so there is a thick shim on the left side of the cam on...
  7. Hoyt Archery Discussion
    Has anyone got the shim specs for the contender elite rh with cam 1/2 plus cams? I have been tortured trying to fix left tear. Finally figured it out. The shims must be wrong as the pivot point of the riser is left of center. Cams straight at full draw. Any help appreciated Pics even better
  8. Bow Tuning
    I took my Matrix and Alphaburner apart for storage a few years back, pulled them both out to put them back together last month and both set of Spacers seem to have gone poof ! None of the shops anywhere around here seem to carry spares so need some help in finding the two sets. Thanks, Randy
  9. Strings, cams, modules and limbs
    WTS: spacer kit, while supplies last!!!!!! Kit will contain 2 of the following.... .35 .40 .50 .60 .65 .70 .75 .80 Asking 15 the CON-US. PM me if you have any questions or need anything in addition or instead of in the listing. PayPal [email protected] Thanks,
1-9 of 9 Results