Archery Talk Forum banner

sight problem

  1. Prodigy and Spot-Hogg sight issues

    Bowtech Archery Discussion
    Hello, I have a Bowtech Prodigy (RH, 70) with a Bowtech QAD Ultra Rest and a 7 pin Spot-Hogg hunter sight large housing. The problem I’m having is the riser is blocking a large amount of the sight pin housing. Is anyone else having a problem with the riser blocking the sight pin housing on...
  2. Question about my setup, confused

    General Archery Discussion
    I put a QAD LD on My bow today and paper tuned it, perfect bullet hole on first shot and put a G5 meta peep on. Went out back to shoot my targets and I was hitting perfect center but about 3-4" low. I ended up having to move my sight assembly down to the lowest possible setting. My pins are...
  3. G5 Optix sight...additional pin install troubles/questions

    General Archery Discussion
    Hello everyone, I just need some advice and direction on how to fix this problem. I recently purchased a used Bowtech Allegiance that came with a G5 Optix 3 pin sight. When I got the bow the sight had only 1 pin in it. I like having 3 pins so I installed the other two pins (the guy gave them...
  4. Toxonics Main Knob Comes Loose

    General Archery Discussion
    Hi Everyone, I have 2 Toxonics Naildriver 5300 sights on 2 different bows. On both of them... during the course of shooting a 5 spot round... the main knob will loosen up causing the sight to dip; if not actually come apart. Has anyone else experienced this? and if so... how have you resolved...
  5. Need your help!

    Bow Tuning
    I got a target bow PSE Shark X, 60 pounds with a Booster sight+ Cartel scope. Yesterday I went in my back yard to shoot my bow and to mark the distances on my sight label, I started with 25 m,made the mark,moved to 30,,50,70 m shot my bow and marked the distance on the label. My problem was when...