Archery Talk Forum banner

size

  1. I can find a rest or sight screw now!

    General Archery Discussion
    No more scrounging trying to find a rest screw long enough or a sight or quiver screw long enough or short enough. It wasn't cheap, but I stocked up on screws. I found myself wasting too much time looking for bolts the length I needed. It seemed like every rest or sight I picked up lately...
  2. Size of sight housing. Big vs. Small.

    General Archery Discussion
    I've recently purchased a sword judge sight to replace my IQ Pro hunter bowsight(for several reasons,) one of the main ones being, the housing for the IQ was huge, and close to the riser, which made aligning the peep with the sight housing difficult(as my peep was already very large.) So, with...
  3. Wolverine boots Men's size 9 1/2

    Clothing, Packs, Footwear and Bow Cases
    Wolverine boots Men's size 9 1/2 Not worn very much. They are lightly insulated with Thinsulate Ultra. Fully camo. $45.00 to your door. USA 48 states only.
  4. Nocturnal sizes?

    Bowhunting and Bowhunter Showcases
    Why are some nocturnals fatter than others of the same size. For example, I shoot the GT nocks and I have some that are slim and one that is fat. I didn't look at it before I bought it. Is there a difference in performance?
  5. E35 Case Question

    General Archery Discussion
    Hey Everybody, I am looking to pick up an SKB case for my E35 but the "iSeries 4217 Double Bow / Rifle Case" has an interior length of 40". My Energy 35 cam to cam is right at 40". Would this fit or do I need to get the "iSeries 5014 Double Bow / Rifle Case" which has an interior length of 50"...
  6. Arrows for a 25# Samick Sage???

    General Archery Discussion
    Hi Everyone! Here's my first post at archerytalk. I'm about to get my first bow, and jump into the world of archery, mainly for small game hunting. I've settled on a 25# Samick Sage, and I have a draw of about 26". I now need to find some arrows for the bow, and I've been thinking aluminum...
  7. Desperately in need of equipment advice!

    Coaches Corner
    I have a 24" draw length and have been shooting a couple of years and am looking to upgrade limbs. Previously shot with a 23" hoyt Avalon plus riser and short hoyt limbs (64" bow). I know which limbs I want but can't decide on the length. Everything I've read online recommends I should shoot at...
  8. Uukha EX1 limbs - but what size?

    F.I.T.A, N.A.A., Collegiate Archery, And J.O.A.D.
    Hi guys, Planning on setting up by recurve with EX1's - they're the price and make I'm after. I'm after opinion on what size setup would benefit my build/draw length? I'm 6'0 - and my draw length (will check it again) is around 27.5"/28" I have been told to get a 70" setup - but was thinking...
  9. Correct arrow and point weight and size I should be using for target shooting

    General Archery Discussion
    Hi, I'm currently shooting a 2012 PSE Supra Max bow (with Hybrid Cam). My bow has a 45# Draw weight, 7" brace height, 320fps and a 27" Draw length. I just want to know what would be the correct arrow length, size or spine I should be using as my shaft and what point weight I should putting on...
  10. Brand new 3 finger hot shot xtacy

    Rests, Releases, Grips, Wrist Straps and Slings
    i have a brand new hot shot xtacy. its brand new never used. never even taken out of the package. its the updated 2013 model and it very different from the 2012 model. can email or text pics. looking to get $90. thanks !
  11. peep size help

    General Archery Discussion
    ok guys im useing a carbon interceptor 5 pin and with it all the way in it seems to small for a 1/4 peep i would really like to use a 3/16 is that to small for low light situations?
  12. Does Spin Wing Size Matter?

    General Archery Discussion
    I know that bigger spin have more drag, but is there a crucial difference? I'm switching over to heavier X10's from my old A/C/G's and i'm wondering if i should reduce my spin wing size to reach 90m easier. (And for that matter, i'm looking into Eli Vanes which are longer than spin wings but...
  13. Arrow tuning

    Bow Tuning
    Hiya, I am considering following arrow configuration: QS3"+AFMJ 31" + fixed (3) blade 100gn. This is going to be shot at abt 300FPS. I am worried that QS1.5" might not be enough to give a proper rotation to the arrow. What's your experience? Brgds
  14. how small is too small?

    Bowhunting and Bowhunter Showcases
    how small is too small? ive been noticing that unless you use a mechanical broadhead the overall cut diameter is getting smaller. how small is too small? i dont know if i could hunt with 7/8 or even an inch, but maybe im wrong. what do you guys think? love to hear your opinions and comments. i...
  15. how small is too small?

    Bowhunting and Bowhunter Showcases
    ive been noticing that unless you use a mechanical broadhead the overall cut diameter is getting smaller. how small is too small? i dont know if i could hunt with 7/8 or even an inch, but maybe im wrong. what do you guys think? love to hear your opinions and comments. i also would like to know...
  16. Determing Fiber Size

    General Archery Discussion
    I purchased a used sight and want to confirm the size of the fiber. How can I do this without purchasing any expensive tools?
  17. How to select Martin Longbow? Bamboo viper or Venom?

    Traditional Archery
    I am going to select a longbow between Bamboo Viper and Venom of Martin archery. The only difference of these two bows what I got from their website is the length. Venom (66") is 2" longer than Bamboo Viper (64"). But the short one is $100 expensive than the longer one. I was confused:eek:. Is...
Top