Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 138 Results
  1. General Archery Discussion
  2. General Archery Discussion
    Howdy! I'd like to figure out how to properly calculate the IBO speed of compound bows. Is it different for each brand? Can I use the omni calculator to help me? I'm confused with following the calculation from the omni calculator webpage but when i use their calculator it reflects a real...
  3. General Archery Discussion
    Archery reloading techniques inspired by historical art including Egyptian, Turkish, Assyrian, Norman, Greek, & Byzantine art Note: art is often unreliable to use, but it is often the few things left for us to understand their techniques
  4. General Archery Discussion
    This review popped up this morning. Solid speeds for sure. For those of us who prefer smooth draw cycles, does anyone know if you will be able to get the EC cam on this platform?
  5. PSE Archery Discussion
    Hey everybody! Has anybody swapped the cams on an EVO NTN to the SE cams? I’m a 27.5” draw and wanting to drop to 60 or 65lbs draw but don’t want to lose a ton of speed. I know speed isn’t everything but I’m currently shooting in the low 240’s with a 510 grain arrow and will be going up for...
  6. General Archery Discussion
    Hi everyone I have this [email protected]" carbon laminated recurve, and I want to reach the fastest arrow speed shot by hand (minimum gpp, no compounds, no footbows category) any ideas how to design an arrow for this record? im thinking of 100 grain arrow with 32 inches long with an overdraw device but...
  7. General Archery Discussion
    Hey All, Putting this out their to see if anybody knows what the difference between the 85% & 80% LO mods will give me in terms of arrow speed? I'm considering the 80% mods for more holding weight since I know I tend to be pretty soft on the back wall. If anybody has any information TIA!
  8. General Archery Discussion
    Does anyone shoot a tx5 at 60# what kind of speeds are you getting? I just ordered a 60# tx5 my DL is 28.5 hoping to be able to get 270+ with a ~450gr arrow is that reasonable?
  9. Bowtech Archery Discussion
    Revolt X owners, what kinda real world speeds are you getting? If you don't mind can you drop your DL/DW and TAW with speeds? If you build your own arrows or know their full set up, the more info the better, please drop that too. Most guys just say "70lb, 29in shooting 450gr at xxx FPS" But I'd...
  10. Hoyt Archery Discussion
    The speed I am getting out of my Helix Ultra seems to be slow relative to the spec IBO speed and speeds I have seen others post. I am shooting the stock strings with the #2 cam set at 28” with the 85% mod at 70.5# my 475 grain arrow is at 257 fps. Are the string stock silencers holding me...
  11. Archery Tools
    Older (pre 2005) Oehler M35 Chrono. Verified that it is operational. Good condition. Has indoor light kit. No printer. Comes with manual. Includes everything needed to test speeds other than a tripod to hold detector. Oehler is recognized as a top rated chronograph manufacturer. Also includes...
  12. Archery Tools
    Older (pre 2008) Easton Bow Mapping System. Comes with everything in photo. I verified the main unit and handheld unit turn on although the contacts on the handheld can be a little touchy at times. System is a little outdated and may not be supported by the manufacturer anymore. If nothing else...
  13. Archery Tools
    Older (pre 2005) Oehler M35 Chrono. Verified that it is operational. Good condition. Has indoor light kit. No printer. Comes with manual. Includes everything needed to test speeds other than a tripod to hold detector.
  14. Hunting Bows
    I am selling my (like new) Hoyt Defiant Turbo. It has never been hunting with and only used for 3D. It's in great shape! Adjustable draw length 26-28" 60-70lb draw weight 33.5" ATA $675 TYD ConUS
  15. Frankenbow Archery Discussion
    For those not familiar with the EVO SD (Short Draw) with ME cams, it's built on the EVO 7 riser and has a BH of 6-5/8" and draw length adjustment range of 24" to 28.5" and an IBO of [email protected]/2. Lots of folks think it is built on a standard EVO 6 Riser, but it's not. That would make too...
  16. Hoyt Archery Discussion
    I recently got the original RX-1 with the #3 cam and 70lb limbs. I'm a 28.5" draw and it is maxed out pulling 72lbs. I'm shooting a heavy 27.5" 543gr FMJ with 50gr brass and 125 heads up front. I'm showing 253 fps consistently on the chrono. I'm not too concerned with the speed but kinda curious...
  17. Mission Archery Discussion
    Does anyone have any chrono data on their Mission Hype DT? I have these data points, but was looking for a couple more: # - Draw - Gr - fps 70 - 30 - 385 - 281 70 - 30 - 500 - 248 60 - 30 - 385 - 252 60 - 30 - 500 - 222
  18. Mathews Archery Discussion
    I am in the market for a long ATA 3D bow with high let-off. I like the TRX lineup but I think I'm limited to the TRX 8 bc I shoot a 30" - 30.5" draw and the TRX 7 cannot be shot at 30" with 80% let-off. I did a search and found a couple different deals on TRX 8 bows, 1 60lb and 1 70lb. I...
1-18 of 138 Results