Archery Talk Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 31 Results
  1. Mathews Archery Discussion
    I installed new set of strings and have been learning how to set up and tune my bow however I'm running into issues. I've checked the string lengths and can confirm they are 88" and 32.75." I have to put a bunch of twists in the cable to get a 70# draw but Im lost with the string. Dl is coming...
  2. DIY Equipment
    See pic. Have an old pse bow. Sent the model number to 60x custom strings. They sent me an 32inch string . it's way too loose. Never messed with a bow before. This was my dad's old one and the string was damaged Was just trying to replace but it's driving me crazy
  3. Crossbow Forum - General Crossbow Discussion
    ( Hypertac 420 ) Manual says axle to axle is measured at full draw , resting on trigger. Hoping a different way to get cam timing marks measurements from the limbs . miss havin the timing marks on the killer instinct, super simple. If anyone has any pointers it would help big ? , bow shop is...
  4. Hoyt Technical Forum
    Hello. I own a custom Hoyt Prevail 40 bow: the typical bow with SVX #4 cam system, but with longer limbs (not sure if they are XT3000 or XT3500) bringing the ATA towards 44-5/8”. Using the C modules, I get a 33.5” draw length. While timing the cams (after the cables/string initial stretch), my...
  5. PSE Archery Discussion
    Hi, I got a new set of cables and string from a well known string company (won't mention it yet to be fair to them). on my very first arrow shot the string derailed (lucky the cables attach the way they do on each ends as it prevented the bow to fall apart) I re-string my bow... double and...
  6. Archery Accessories
    Hello all. I’ve got a PSE Toxic that I’m trying to hang on to. It’s been good to me. The cams were damaged in my relocation. I can’t find replacements anywhere (the manufacturer isn’t supplying parts anymore). Any suggestions?
  7. Bowtech Archery Discussion
    Are the accurate lengths of the string and cables for the Medalist 38 a closely guarded state secret? When I bought Bringer, my medalist 38, I asked the company. Since then I've asked several times and still I have not had an answer. I bought a set from a place called Palmetto Outdoors and they...
  8. General Archery Discussion
    I've decided to make my own strings and cables and am quite confused regarding end of string/cables serving and center serving materials. Let me first say that I will be using BCY X-99 material (royal blue and fluorescent purple, heard that colours matter), at 28 strands. My bow is set up at 42...
  9. General Archery Discussion
    Hi there, I'm a newbie in archery.. I just bought a brand new 2016 Pse StingerX. It was a demo from a bow hunting certificate.. It has never shot an arrow. My question is about the string.. It looks absolutly brand new.. Serving is tight.. Should I change it before shooting it or can I shoot it...
  10. General Archery Discussion
    Hi archery camaradas, I've been walking a lot of bush and heavy brush this season with my Bowtech Reign 7 while moose hunting. No wonder my bow string now looks horrible. The bow still runs factory string and cables. I think it is time to replace the string and cables. I googled then checked...
  11. General Archery Discussion
    I recently installed a set of pine ridge archery wishbone strings silencers on my Matthews Z7 and ever since I’ve had issues with my peep and dloop twisting to the right. I put it in the press and twisted in the opposite direction to realign the peep, which worked for about 10 shots until the...
  12. General Archery Discussion
    Good Afternoon All, Does an unused string have a shelf life? Debating picking up a backup string, and wondering how long it can sit unused. Thanks in advance, J
  13. General Archery Discussion
    Hey all, I'm getting some confusing measurements out of my bow and I'm looking for some guidance to make sure I'm troubleshooting it in the proper fashion. Several years ago I wanted to dabble in target shooting and bought a used '06 Hoyt Pro Elite with what I believe are 2009 XT3000 limbs...
  14. Arrows & Strings
    I’m currently in a situation to replace both my strings and cables on both of compound bows. This cyclical investment seems to be needed every 2 year cycle, that’s what I’ve read. While some just say if it’s in good shape and kept waxed the string and cables don’t need to be changed. Or do they...
  15. Arrows & Strings
    A fellow archery member in our club makes custom strings and in my eyes and from speaking to him, he’s like a guru, more specifically around competition target archery. He said that his strings are all made with pre-stretched string material. Is this crucial or not?
  16. General Archery Discussion
    Hi All, I am trying my hand at this forum thing. I have a problem with my Mathews Jewel that my dealer can't figure out either. All thoughts and input are appreciated. I've been shooting a good 12 yrs or more and have owned my Jewel for about 4 or 5 years. I shoot 3D and hunt. I finally...
1-16 of 31 Results
Top