Archery Talk Forum banner

timing cams

  1. Timing Mathews Halon 6

    Mathews Archery Discussion
    I'm new the this forum and new to bow maintaince/tuning. Question on timing. Just put new strings on my Halon 6. Peep and Nock in place. Everything looks level with rest. When I first put the string on...the cables were even in regards to the tiny circles on the cams. However, when I...
  2. Twist's in the cable and string.....?

    General Archery Discussion
    After some time fixing my bow up and getting the cams in timing and twisting and un-twisting cables I finally got everything in specs NOW my question is..... is there a set standard for the amount of twist the cables should have? You can see in the pictures that the control cable is not Twisted...
  3. Synchronizing and timing Hoyt GTX cams

    Bow Tuning
    Hi, I'm trying to do this on my VE+... Here's what I have so far: At full draw the bottom cam hits the flat part of the module perfectly, and the top cam is just slightly off (~1mm or less than 1/16"). So, my question. Do you see anything wrong with how the cams are rotated at rest...
  4. PSE Hybrid cam L6-vendetta HELP!!!

    Bow Tuning
    I bought a PSE Vendetta XS a few years back and now I am having tuning issues. I keep getting a tail high on the paper tune (3/4"). I use a WB rest that is set a tad higher than the nock already, so it is not a high nock issue. I think it might be a cam synchronize issue, but the sync marks on...
  5. Alphaburner timing

    Target Bows
    I just changed cables and strings on my Alphaburner the timing seems to be off. Does anybody have any experiance with the burner when it comes to getting it back in time.
Top