Archery Talk Forum banner

x-ringer

  1. *** Ultimate 3-d arrow set: Victory X-ringer 350 V1 ***

    Arrows, Broadheads, Quivers and Arrow Components
    Superb set of X-ringer 3d arrows. Craftsmanship building was meticulous. These are the STRONG 3D arrows, not the lighter version that broke so easily. Never got into 3d so only a few arrows have been flung indoors when setting these up. Here is what's included: 23 Arrows (21 fletched with...
  2. Victory X-RingerHV V1 350

    Arrows, Broadheads, Quivers and Arrow Components
    I have 11 Victory X-Ringer HV. They are V1 and 350 spine. 28.5" carbon to carbon or 29" to nock throat. Fletched with 3 orange AAE Max fletchings. $100 tyd
  3. X-ringer HV V1 350s Dozen

    Arrows, Broadheads, Quivers and Arrow Components
    For sale X-Ringer HV V-1 350s Dozen. Fletched right helical and pin bushings install/ pin nicks included. 100 grain glue in points also installed cut to 28". Asking $100 flat via paypal lower 48 only.
  4. (4) Victory X-Ringer HV V1 250 arrows (Fusion Vanes)

    Arrows, Broadheads, Quivers and Arrow Components
    I have (4) of them. 30 1/16" from end of NIBB to valley of nock. Approx. 382-384 grains. I believe they had 100 grain NIBBS, not sure. These have Fusion vanes with custom Onestringer wraps. Says SPEEDZONE "you've been caught" Numbers on them too, #3, 4, 5, & 6 In excellent shape...
  5. X-Ringer HV 350 Arrows + extras

    Arrows, Broadheads, Quivers and Arrow Components
    I am not shooting indoor this winter, so I am selling off my indoor paper-punchers and accessories from last winter. X-Ringer HV350 V5 arrows (.350 spine, 0.372" O.D., 6.2 gpi) (4) arrows cut/fletched/heads glued in - 325gr each (approx). - Heads weigh 120gr as assembled (90gr head + 20gr...
  6. Victory X-Ringer 100gr glue-in points SS, or GT X-Cutter

    Arrows, Broadheads, Quivers and Arrow Components
    New, dozen, unused 100gr glue-in tips for the Victory X-Ringer sized arrows. These are the victory brand heads (stainless steel). Will fit any arrow with a 0.345" i.d. This should fit the Gold Tip X-Cutters as well (I used X-cutter tips in my X-Ringers). These are not threaded on the...
  7. Or trade 8 victory x-ringer 350's plus extra pin bushings and nocks

    Arrows, Broadheads, Quivers and Arrow Components
    I am looking to sell my X-RINGERS. They are 26 15/16 throat to end of carbon. 300 grn. with razor feathers ( need to be replaced I think) they will come with the 80 grn glue in tips. also to go with them are a few pin bushings and extra pin nocks. i am looking to get 65 for the lot obo. if you...
  8. X-Ringer + Fusion 2.1" + QAD Rest = clearance?

    General Archery Discussion
    Anybody shooting this setup? I was curious if there is enough clearance for this size arrow. With the arrow diameter being large (0.372") and the height of the fusions being at 0.56" tall, will there be contact? I am researching a target setup and I am fluttering between the 2.1" and the 1.5"...
  9. !!!6 X-RINGER HV V5's, Like New!!!

    Arrows, Broadheads, Quivers and Arrow Components
    I have 6 X-RINGER HV V5'S For Sale! These are like new condition...only shot a couple times. Come fletched and have pin nocks to go along with them! They are cut 28.5" carbon to carbon. I will email pics! Thanks for looking! God Bless! $40 TYD!
Top