Archery Talk Forum banner
1 - 1 of 6 Posts

· Registered
3,044 Posts
No adjustment on the cams.

Cams are 80% letoff when strings and cables are in spec (you may have to twist / untwist to achieve 80%).

To go to 65% as stated above, there is a plastic cap that goes over the module that hits a hair sooner in draw than without- this drops letoff to 65%.

Sounds like you just need to let you dealer tweak strings and cables a bit to get you back to where you need to be.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.