Archery Talk Forum banner
Status
Not open for further replies.
1 - 19 of 19 Posts

·
Registered
Joined
·
316 Posts
Discussion Starter · #1 ·
I have a 2010 axe 6 with the 2011 evo cams in MOTS, 50-60lb, 28.5 inch draw but can be easily adjusted without a press. This bow is a 9/10 and has been kept in a case when not in use. It comes with a matching 8 inch octane stabilizer, Rip Cord Code Red drop away, and brand new Trophy Ridge Punisher 3 sights. The strings are in good condition and the cables show some slight server seperation at the bottom cam from shooting. The only blemish i can find on the bow is a pen tip sized nick on the riser that cannot even be seen unless you are looking for it. I even tried to take pics of it to put on here but it wouldnt show up in them. Maxed at 60lb, in my draw length, with a 370 grain arrow I am getting 292 f.p.s. out of this bow. The price is 525$ tyd M.O. or paypal +3%.
 

Attachments

·
Registered
Bowtech Realm X and PSE Inertia 50lbs
Joined
·
4,841 Posts
I am interested, what does the EVO cams do to it from the Axe 6 cams? thanks
 

·
Registered
Joined
·
316 Posts
Discussion Starter · #7 ·
The 2010 cams had a problem with the draw length module slipping, PSE fixed this with the 2011 cam system, they are the same cams as on the 2011 evo.
 

·
Registered
Joined
·
1,118 Posts
Bump! Very clean bow. Well taken care of and quite a shooter!
 
1 - 19 of 19 Posts
Status
Not open for further replies.
Top