Archery Talk Forum banner

Status
Not open for further replies.
1 - 14 of 14 Posts

·
Registered
Joined
·
183 Posts
Discussion Starter #1
Hoyt Pro-Comp Elite (PCE), deep-red colored riser with white ‘marbling’, with XT-2000 target limbs. This is one awesome looking & shooting bow!!! Great for both indoor, field & 3d.

Current setup: #2.5 Spiral-X cams, 50#, 7-5/8" brace height, 65% let-off, w/ 60-X strings & cables (see photos).
String & cables have ~200 shots thru them. The Spiral-X cams provide great speed at this short draw, with an unbelievably solid back-wall.

Original set-up: #4 GTX Cam & 1/2, 50-60#, 27.5”-29” draw length, 8” brace height, and 65% / 75% let-off.
The GTX cams provide good speed too, and are very smooth on the draw with a wider valley to settle into, and are a great versatile, indoor/outdoor cam.

The riser & limbs and Like New!! There are 2 small set-screw marks on the right side of the riser from the arrow-rest, next to the rest mounting hole (see photos), and a light scuff at the rear stabilizer hole from the stabilizer. There are no marks on the limbs.

I will sell the bow in either configuration, and set it & get it timed, for $590 TYD. Paypal or Money Order only.

The remaining cams & strings/cables will then be available for sale separately.

UPS shipped / insured TYD to the lower 48.

Thanks for looking!!
Stan
 

Attachments

1 - 14 of 14 Posts
Status
Not open for further replies.
Top