Archery Talk Forum banner

2023 BOWTECH RECKONING 36 and 39 GEN2 [Official thread]

38446 Views 355 Replies 73 Participants Last post by  johnsontj981
Here we can discus. First reviews are online.


1 - 5 of 5 Posts

· Registered
Joined
·
20,562 Posts
I’m a little perplexed by this. Almost everyone has moved to 1/4” DL adjustments however Bowtech is offering a ton of good tech with these bows but left this part out. This means pressing the bow and twisting cables unless you get lucky and hit your DL with no adjustments needed.
You did see where you can adjust cables without a press right??
 

· Registered
Joined
·
20,562 Posts
Bowtech needs to put out a video or literature explaining some of this. Would really like to know how adjusting timing with this system affects DL. Not sure this system is intended to move enough to add/subtract from DL but more info would answer this question.
I agree they do need to give more info on this.

I know when I twist the cables it changes like draw weight and length also. Since I'm like a 30.4 inch draw length I usually set timing the need to twist both cables to keep timing and get the desired draw length I want which usually also changes the left off some as well and draw weight to .
 
1 - 5 of 5 Posts
Top