Archery Talk Forum banner

2312 vs 2314

1663 8
ive found out that my 07 ally really likes 2314 shafts but i cant get them down light enough for 3d also. i would like to set it up for indoor and 3d. i was wondering if 2312 would be a big spine difference then the 2314 and the bow might not like them as well. im shooting the 2314 at 27" with insert and 125 grain for indoor and its a super forgiving setup and i can get 50grain glue in nibs and cut the 2312s down to 26" if i have to and that should be around 350grains. the ally shoots 290 with my xcutters at 62lbs but they are super stiff and dont fly real well past 30 yrds. thanks for the input and responses.
1 - 9 of 9 Posts

· Registered
Joined
·
352 Posts
Discussion Starter · #5 ·
i had thought about the 2412 also. i may just have to tweak the ally until she likes the xcutters. they fly good to about 35 yrds but then they wanna get a lil loopy. i cant wait to get my bucknasty strings and get this thing really fine tuned.:D thanks for the input guys.
 

· Registered
Joined
·
1,833 Posts
or a Beman 9.3. My youngest shoots 2312's and I had to straighten her arrows a few times from hitting who knows what in the bales. Next batch of arrows will be carbon.
 

· Registered
Joined
·
8,473 Posts
I think your 2312's cut down to 26 inches and hot 50 nibbs should fly great out of the Ally with some tuning. If im not to awful bad mistaken the 2314 arrows are .390 spine where as the 2312s are .420 spine. I used to shoot the 2312 arrows pretty reguraly for 3d and never had problems with them bending.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top