[goldtip45]

what size spine shaft are you using for your hunting setup. does it run a little weak or stiff with the medium cams. thanks

 

[goldtip45]

spine

anyone out there shooting 60lbs with a e-force around 27 in draw.

 

[Guest]

I would say at 60# 400 spines would be for you. Not positive though. How long do you cut your arrows? Maybe someone could run a TAP for ya.

 

[Jose Boudreaux]

400 spine(like a 5575) with a 100 grain head 28" arrow or under is just right

I had that on a 60lb Q2 at 28" draw....100 grain thunderhead..

 

[goldtip45]

spine

when running a tap i was told just to take the shaft length without nock so instead of 27 inches its actually 26.5--for shaft length. for a medium cam setup maybe a spine of 430 or above.

 

[Jose Boudreaux]

you'd do better being a littel more stiff

 

[ultramax]

you'd do better being a littel more stiff

If i hear that one more time.

 

[goldtip45]

spine

well im off to the docs! im sure im not the only archer out here with a stiffness issue. got to get this fixed for if i dont i wont be able to shoot accurately,:zip: :wink: :RockOn: