Archery Talk Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
583 Posts
Discussion Starter · #1 ·
i plan on getting some Easton axis just not sure which spine to get. Arrow length will be 27.5 at 67lb draw. I plan on using 125 heads with 50 grain brass inserts. Any thoughts appreciated!
 

·
Registered
Joined
·
6,792 Posts
If you are going to use 125gr heads and brass inserts you will have to use a 300 spined shaft.
 

·
Registered
Joined
·
896 Posts
Mine were 27" 125 gr head and 75 gr inserts. Went with 300 spine. Shoot amazing. 70 lbs
 

·
Registered
Joined
·
5,928 Posts
With that much weight up front and your specs, I'd go 300 spine.

Sent from my SM-G920V using Tapatalk
 

·
Registered
Joined
·
2,055 Posts
You have not provided enough info. Need to specify bow and draw length. With my 330 IBO Supra, that arrow would probably work to 27.5 or 28" DL at 67#(maybe). With my 352 IBO DNA. I would move to 300 spine if your draw is over 26.5". Of course, this is based on charts and people sometimes get much different results.
 
1 - 12 of 12 Posts
Top