Archery Talk Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,301 Posts
Discussion Starter · #1 ·
Alright so I am shooting a 28.5" 2008 Hoyt ultra elite with the Cam an Half Plus. Set at 49.76#.
I am shooting 670 x10 protour, 26.25" with a 90 grain glue in. Pin nock system. And easton tite flight vanes, 2.75". 282 grains.
Shooting a whopping 270FPS.
Do to personal problems, can't shoot any more poundage. I want to try to shoot a shaft that might have a little more width to it. Hard to get something for that poundage though and still want to weigh around 280 grains so that I don't loose any more speed.
I want to stick with Easton though..
Anyone have any suggestions...? just curious...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top