Joined
·
463 Posts
ttt
82nd airborne and limbdriver
I have a 82nd airborne and just put on a limberdriver pro. I am left hand. I have the rest set as far right(away from the riser) as it will go. It is shooting good/no tears through paper, but has zero left to the right. Anyone with the same combo have you had to do the same?
65 pounds
28" draw
gold tip pros 5575 @ 27.5 inches 100 grain tips
blazers
65 pounds
28" draw
gold tip pros 5575 @ 27.5 inches 100 grain tips
blazers
1 - 5 of 5 Posts
Joined
·
463 Posts
TtT
Joined
·
949 Posts
82nd
My 09' 82nd is set at 13/16 , with limb driver pro. and shoots great thru
paper.:thumbs_up
My 09' 82nd is set at 13/16 , with limb driver pro. and shoots great thru
paper.:thumbs_up
I would have to venture that you (the thread starter with a far out rest) must be putting torque on the riser possibly. That doesn't seem right as along with the quote above, my Limb Driver is set out from my riser at 7/8" on my 82nd, 13/16 on my Admiral and 7/8" on my Allegiance.
Most, from bow to bow (Bowtech) will vary center shot at exactly 13/16-7/8".
1 - 5 of 5 Posts
