Archery Talk Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
402 Posts
Discussion Starter #1
9 easton lightspeed 400's

One blue vane will be switched as the nocking vane today.
They have 100 grain cb points, glued in with low temp hot melt glue stick, and the blazer x2's are on with Fletchtite platinum.
(only 8 are complete, vanes, nocks, and points) I have one extra without a nibb or fletching and lacks point for paper tuning.
I simply have too many groups of arrows around 7.2g-7.4g weight (7.4grains). These arrows are in near new condition. I want to get some bigger dia. arrows for indoor target. These arrows have been shot an average of 15-25 times each (varies).
28.5" from throat of knock to end of carbon. I have been shooting them at this length out of 59lb Hoyt FX. You want a little stiffer for 65lb, you have perhaps some shaft to cut to stiffen, or go to 90grn points.

$75 TYD lower 48
no trades!
 

·
Registered
Joined
·
402 Posts
Discussion Starter #2
ttt
 

·
Registered
Joined
·
402 Posts
Discussion Starter #3
ttt
 

·
Registered
Joined
·
402 Posts
Discussion Starter #4
These arrows are in great shape! A blue nock vane will add to their cosmetic appeal.
 

·
Registered
Joined
·
402 Posts
Discussion Starter #5
thread closed!
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top