Archery Talk Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 ·
Just noticed my specs have changed slightly with no change in performance so i hate to mess with anything. But just wondering what everybody else has for specs for their bow. My ata is 36 6/16 brace is 7 inch i know this does not match the factory specs but it shoots great. My prevoius brace was 36 5/16 and brace 7 1/32 but the cams are still in the same timing marks. This is for a 29 inch draw and 70 pound draw measured. Thanks
 

·
Registered
Joined
·
2,387 Posts
Binary cams

That's why you have to love these cams. A little string stretch, but things still work great. I would keep shooting at that small difference. Keep an eye on it, and if changes more, than a twist or 2 should get you right back.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top