Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi all,

New to the forums here.

Changing the draw length on the Bear Apprentice 2 is supposed to be really easy: You take an Allen wrench and remove the screw from the module and put it back into the hole that corresponds with your desired draw length. I seemed to have trouble with the Allen wrench size -- the 2 mm and 2.5 mm from my metric set don't fit, and neither does my 5/64. My 3/32 seems pretty close, but for some reason it's not going in. I think this is because my Allen wrench is stripped, so I want to double check on the size before I go out and buy a new one.

For those of you with the Apprentice, which Allen wrench did you use to change the draw length?
 

·
Shooter of flesh
Joined
·
7,660 Posts
If you stay into bows, toss the metric set before you ruin more Allen bolts. Unless you're shooting a Win Win or some other Eastern bow, everything is Standard.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #4
The metric set was from when my parents moved from Canada! I'll keep it around for other things. Thanks for your help!
 
1 - 4 of 4 Posts
Top