Archery Talk Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
431 Posts
Discussion Starter · #1 ·
I'm shooting a Allegiance 81.5# with 28"draw, my arrows are Beman Max4 300 at 28.5" with 125grain tips(about 10%FOC). I've been trying to paper tune my bow for awhile and always get a hard right tear even if I move the rest to the left side center. I can get bullet holes if I move it far enough to the right but then my centershot is WAY off. What can I do, I really like these arrows and think they should be stiff enough but you can see my problem. Also no matter how I adjust the rest my pin is way left of the string and arrow. I'm stumped.
 

·
Registered
Joined
·
2,706 Posts
Limited information, and a few guesses on my part, but according to AA, I'd try backing down to about 75 to 78 lbs and see if that doesn't correct your problem. Reducing point weight didn't do much at all to it either.

Good luck
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top