Archery Talk Forum banner

AM32 limb/cam creek

393 views 3 replies 3 participants last post by  meatinthepan 
#1 ·
my brother has an 80lb bone collector am32 and it has deveopled a creek when drawing back, it happens about halfway back and we cant pinpoint it, anyone have any ideas? also how tight or loose are the bolts supposed to be where the limb pivots, the two bolts that screw in from the side?
 
#2 ·
The bolt that runs through the limb rockers and pocket should be fairly tight. They shouldn't be loose by any means.
The creak or pop that you are hearing is fairly common with the am's for some reason. It is coming from your upper limb pocket. There is a fix I just can't remember what it is. It has been covered here before so you might be able to find it. So far I have not had the problematic noise.
 
#3 ·
U have to lube the limb pockets up, With a good oil like tri flow.. There is several threads about this problem but a easy fix...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top