Archery Talk Forum banner

VPA or Annihilator

  • VPA 150gr. 3-Blade 1-1/4 Vented or 1-1/8 Solid

    Votes: 10 50%
  • Annihilator 150gr. 1-1/16

    Votes: 10 50%

Annihilator Broadheads worth the hype?

1 reading
6.6K views 27 replies 17 participants last post by  cucruzn  
#1 ·
Hey everyone,
Been seeing a lot of good things about the Annihilator broadheads and was wondering your experiences with them. Penetration, sharpening, durability, flight etc…

if you have experience with VPA 3-blade heads, that would be appreciated too. I’m kind of going in between the two
Thanks
 
#7 ·
I have the VPA and ANNIHILATOR XL in 125 grain. Unfortunately I ate tag soup this year so I can't talk about how they did on an animal. However they both sharpen and fly the same for me. At the time of the hunt I had the ANNIHILATOR in the quiver. Was just a last minute decision. Either with my setup should get me a passthrough on whitetail as long as I do my part.
 
#12 · (Edited)
I’ve used a 3 pack of 100gr annihilator and they weren’t that sharp and never ended up super sharp. The deer always died within 100 yards. The blood trails didn’t exist. As in never saw a drop before reaching the deer on one and very little at impact on another being it. One was shot/died in a cut field and even following the trail of kicked up dirt there was no blood to be found. But as I said, they did all die within 100 yards so it wasn’t the worst thing ever. I don’t think I’d buy more but I didn’t hate them either. Lost a couple and moved to something else rather than shoot the single head or buy more.
 
#13 ·
I’ve used a 3 pack and they weren’t that sharp and never ended up super sharp. The deer always died within 100 yards. The blood trails didn’t exist. As in never saw a drop before reaching the deer on one and very little at impact on another being it. One was shot/died in a cut field and even following the trail of kicked up dirt there was no blood to be found. But as I said, they did all die within 100 yards so it wasn’t the worst thing ever. I don’t think I’d buy more but I didn’t hate them either. Lost a couple and moved to something else rather than shoot the single head or buy more.
Of which head the annihilator or VPA?
 
#19 ·
No experience with the vpa which I’m sure are good heads but I took a Buck and my son a doe this year with the annihilator xl and both died very fast within 30 yds of shot. I could care less about sharpness out of the pack as I practice with the heads I hunt with. They sharpen up easily enough after practice and hold an edge going into the foam many times. Even after a pass through they were sharp of course needed touched up before going back in the quiver. They are extremely durable because of the design.
 
#20 ·
So I started a separate post because I forgot about this one after I took a deer this year. I used the annihilator 125xl and they done great. I hit further back and higher then I wanted but the buck died in sight. When hit he jumped and then walked which really confused me. Thought maybe I missed. Small blood but I think it was how high I hit him and the fact that he walked afterwards to where he bed down and died. I watched everything from my stand and he was 15 yards on the shot. He walked behind me and died a total of 32 yards away from me. I used my PSE levitate 28.5" draw 70 lbs easton axis 300 spine don't know my total arrow weight. Arrow was buried in the dirt and broadhead was fine.
 

Attachments

#21 ·
Elite Valor @ 70lbs; GTHunter XT 300; 50 gr insert, 150 gr Annihilator XL; 472 gr arrow weight. Shot 4 deer with the same broadhead, pulled out of the ground, resharpen and back in the quiver. Sharpened using sandpaper on my workbench (400, 600, 1000, 1500 grit) followed by leather strop. 1000 and 1500 and strop were used post shot. Deer were shot 15-37 yds, max recovery distance was 30 yds. It's not hype when it works.
 
#23 ·
I did not. I used the QAD exodus this last year, or is should say I attempted to use them as no bucks I wanted to shoot came within range. I don't plan on getting the as I am probably going to go to 200 grain heads next year once I save up for stiffer arrows and better components. This year I am using 150 grains VPA single bevels.
 
#28 ·
I prefer to have broad heads that I can sharpen/re-sharpen. It was one of the characteristics that I liked here. 2 years ago I tried the Grizzly Stick 125 single bevel. Nice heads but not as durable. One I shot into the ground and hit a tree root and it bent the tip and was no longer usable. Similar price, less durable. These I have pulled out of the ground as everything has been a pass through. I am 27" draw with 253 fps from the chronograph. Not fast but the heavier arrows have provided the penetration I was looking for.