Archery Talk Forum banner
1 - 2 of 2 Posts

· Registered
28 Posts
Discussion Starter · #1 ·
I was wanting to know what the axle to axle and the brace height measure on your bow, and also if you have replaced the string and cable on it? I know what the factory specs are for the bow but I am wanting actual measurements off of another G2XL. I had the string and cable replaced on mine and like a bonehead I didn't take the measurements before I took it in. I'm not sure but I think something is off, the cam doesn't look quite right and the A2A and brace doesn't measure to factory spec. But they may not have measured to spec before. The shop that did it ordered the right lengths and everything and said that it would be OK to put a couple more twists in the string but just wanted to check some specs from somebody elses bow before I did anything. Any help is greatly appreciated! Thanks in advance!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.