Archery Talk Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
11,460 Posts
Discussion Starter #1
Anyone have a cheap and easy way to make a stick in the ground bowholder or one that stays on the bow?
 

·
Registered
Joined
·
11,510 Posts
I made a couple bipods that are secured by the stabilizer. A scrap of aluminum, a broken Arrow and a couple of screws. The legs come off and will screw together and store in your quiver. It weighs maybe an oz and can be left on the bow to shoot


Sent from my SM-S920L using Tapatalk
 

·
Registered
Joined
·
11,510 Posts
Another I made. This one's my favorite. Again scrap of aluminum, couple screws and a broken arrow. I might have $15 all three


Sent from my SM-S920L using Tapatalk
 

·
Registered
Joined
·
148 Posts
I have taken an electric fence post and bent the top 6" at a right angle. Stick it in the ground where convenient and then hand the bow by the top limb. These mounted on the bow look nice. Might have to try a couple of them though they look like they could fall rather easy.
 

·
Distance hole puncher
Joined
·
1,978 Posts

·
Registered
Joined
·
43 Posts
I machined a small aluminum block that the stabilizer mounts to the bow, threaded two holes that will accept an arrow insert thread size screw and put small o ring in between arrow and aluminum block. Worked great!
 
1 - 8 of 8 Posts
Top