Archery Talk Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
341 Posts
Discussion Starter #1
Is anyone using the Archor Sight with a single pin sight like HHA? I have a HHA 5519 Sight and been thinking of getting the anchor sight just to see if I can shoot with glasses, getting a little harded to see the target past 40 yards ( turning 52 doesn't help ) but if the archor sight did work I give it a try.

I like my single and rather not switch.

Any help or even some pictures of how you installed it on you bow would be great.
Thanks All
Brian
 

·
THWACK!!!!
Joined
·
9,754 Posts
I used to have this setup but don't anymore. If I remember correctly you may need to have the anchor sight behind the riser. This due to how close the sight is to the riser. I an not 100% on this though. No reason you can't use them together though.
 

·
Registered
Joined
·
6,931 Posts
I have this set up with no problems at all. Yes the AS is installed on the shooters side of the riser which puts the sliding pin very close to it when shooting at the longest distances but for the most part you just glance down at the Anchor Sight right before you shoot to check for any torque.

Doug
 

·
Registered
Joined
·
341 Posts
Discussion Starter #5
Thanks Y'all. Doug you wouldn't by chance a have a pic of your setup?
 
1 - 8 of 8 Posts
Top