Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
294 Posts
Discussion Starter #1
Hey everyone. Getting ready to fletch my first batch of arrow. I'm using an adhesive wrap from custom arrow wraps. Will acetone hurt my wraps? What would you suggest I use to prep my wrapped arrows? Thanks!!!!
 

·
Registered
Joined
·
14,506 Posts
do not use any chemicals on the wrap, if you want to do anything just a tiny bit of soapy water and rinse well and air dry. BUT i dont do anything to my wraps, im careful not to touch them and vanes stick to them like velcro, on a wrap they dont come off. be careful with excess glue as it will buger up the wrap if you get it all over and are sloppy
 

·
Registered
Joined
·
611 Posts
wash your hands with soap and water wrap arrow then fletch. no need to clean them.
 

·
Registered
Joined
·
2,684 Posts
I agree with the above statements. Do not use acetone on the wraps. It will take all of the print off of the wraps, and you will end up with plain white wraps. Make sure your hands are clean, and don't do anything to the wraps, except put the vanes on them.
 
1 - 4 of 4 Posts
Top