Go to 44:30, Chris has the Lift 28" 80lb mods shooting 350 spine, Mathews V3 and up like a weaker spine

 

Thanks. Yeah he never says how long his arrows are from what I have seen. Hard to find complete setups and results. Is there a good thread for that here? I’m new.

 

I've shot nothing but 250 sp shafts out of my Mathews V3Xs and had no issues tuning. I plan to run 250 sp Valyrie Reigns through my Lift 33.

As far as arrows are concerned, the RIP TKO is probably the best all around shaft on the market. Relatively light GPI for high FOC without getting overly heavy, but still plenty durable.

 

I’d cut the shafts to 28” and go with a 300 spine. I shoot GT pro hunters 475 grains
28 3/4” ctc arrow length 72 lbs 29.5” dl

 

deally 29” (could go 28 or 27.5 but I like having ten fingers and things happen) arrow cut, with 50gr insert and 100gr point/broadheads
5mm arrows desired. Specifically looking at

Go to 44:30, Chris has the Lift 28" 80lb mods shooting 350 spine, Mathews V3 and up like a weaker spine

FYI I saw he was shooting 300s 5mm RIP TKO this year.

I am going to go with that I think.

 

Now hes back the the 350s. I have a 30.5 inch draw 70lbs and bounce between 300-250 spine arrows. I load up the 250 spines with 200-225 up front but the 300s with 150 just seem more forgiving. My scary accurate setups are always with the 300s.

 

Im similar to your specs and shoot RIP TKO 300's with 50 grain inserts. Tuned great.