Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,685 Posts
Discussion Starter #1
I shoot a Martin MV2 @ 26" DL and 60# DW. I'm looking at buying Easton Axis arrows for hunting and need to know if the Axis 500 cut to 26" with a 100 grain broadhead and 4" quickspin vanes will match my setup. If not, what length do I need to cut the arrows to get them to spine out correctly.
Can anyone with AA or TAP check this out for me. Thanks.

Tom.
 

·
Registered
Joined
·
12,164 Posts
Tap has a free trial download that works very well.
I think this is close, I'm still figuring out TAP myself.

Someone else want to try?
 

·
Registered
Joined
·
1,685 Posts
Discussion Starter #3
Thanks for the quick response Bellows1 but I have no idea what the chart is telling me. My MV2 has the Fury cams if that helps any.

Tom.
 

·
Registered
Joined
·
12,164 Posts
TomK said:
Thanks for the quick response Bellows1 but I have no idea what the chart is telling me. My MV2 has the Fury cams if that helps any.

Tom.

Me either. :D

If you look at the hands I put on it, it says that arrow is right in the sweet spot for your set-up.
I put in all the data I had, (at the time) I'm not sure what I used for cams, I think it was the fury. The top line in the arrow section is the one you specified, above that is a color bar, Green, indicating that it is a good choice. If it veers out off the green it is not.
 

·
Registered
Joined
·
1,685 Posts
Discussion Starter #5
Thanks again.

Tom.
 
1 - 5 of 5 Posts
Top