Archery Talk Forum banner
1 - 10 of 10 Posts

·
Vendor
Joined
·
48 Posts
Discussion Starter · #1 ·
The Mini Square
(previously posted by Nitrous24 now Evolution Designs)
It is an arrow square that I have designed and 3D Print using PETG (better temp resistance and strength)
It works with carbon and aluminum arrows, as well as inserts and bushings.

Mini------------------------------------------------------------Mini XL
7392315
7392316



The Mini is small enough to fit in the palm of your hand or you can mount it to a bench. There are (2) #6 screw holes (screws not included) to attach it to a work bench or
use the included double stick velcro to mount it to any surface. Use it there or pull it off and sit in front of the t.v. while working on your
arrows.

The Mini XL is design to give support to the middle of the arrow when spinning, it is designed to be mounted to a bench or board when using, and It also has (2) #6 screw holes (screws included with the XL) for attaching to a bench or board.

The Sanding column is designed rounded so that the sandpaper can be rotated around the column so as not to need to replace the sandpaper as often.

The column is designed with a slight taper at the top for easy sandpaper replacement.

It can hold arrows from .20 OD up to .50 OD.

I keep all colors in stock ready to ship.
Blue, Red, Desert Tan, Purple, Dark Gray, OD Green, Teal, and Orange

7392327


Mini Square
(1) Mini Square
(5) Sandpaper Belts (220 grit)
(1) Double Stick Velcro (roughly 3")
$17 TYD and I pay PayPal fees


7392326


Mini Square XL
(1) Mini Square XL
(5) Sandpaper Belts (220 grit)
(2) #6 x 1" long screws
$20 TYD and I pay PayPal fees

7392322


Replacement Sandpaper Belts

(5) Belts - $6 TYD
(10) Belts - $8 TYD
(15) Belts - $10 TYD


7392320




7392328
7392334


7392331
7392338



PM me or Comment Below to Order
 

·
Registered
Joined
·
2,254 Posts
PM on the way
 
1 - 10 of 10 Posts
Top