Archery Talk Forum banner

Arrows for AM32

272 Views 3 Replies 4 Participants Last post by  archeryonyx
I have an AM32 with 29" draw length, 70# draw weight and shoot 125gr. broadheads but am having difficulty choosing a proper arrow as the Easton charts I look at place the set-up on the borderline. Any suggestions? I think an Easton 340 is likely the right choice but the guy at my archery shop is trying to sell me 400s.
1 - 4 of 4 Posts

· Registered
Joined
·
2,847 Posts
Get the 340's. At a 29" draw length, about the shortest arrow you can run is a 27". That arrow, in the 400, might be OK for a 75 grain point in your bow; but is probably going to be underspined with a 125 grain head.
 

· Registered
Joined
·
537 Posts
IMHO you are right on the border. if you go with the 400's and they are a little week you could just back the limbs off a little and that should put you in the right spine range. I did shoot 340's cut to 28.5" at a 29" draw and they shot preaty good threw a drenalin but did have a little issues with getting broadheads to fly true. i now shoot 400's cut to 28.25 at 62lbs threw a GTO and they fly great. i am more accurate and concistant by droping wieght. hope this helps.
 

· Registered
Joined
·
324 Posts
340 would be the right choice.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top