Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
I have two Hoyt Bows. 2009 powerhawk and 2010 Turbohawk. Hoyt specs has both bows ATA at 32". The Powerhawk I bought new has the original strings and has ATA of 32.5". The Turbohawk I bought used on here with custom strings they measure the same length as the factory strings and it has A ATA of 31". They both are set at the same lbs and draw length. Is this typical?? Whats your thoughts?
THANKS GWARD
 

·
Registered
Joined
·
578 Posts
If the Turbohawk has the number 2 cam with a DL between 26" and 27.5", then 31" ATA is spot on with the tune charts and the tune charts have the Powerhawk at 32.5" for a 27" dl. So depending on what your DL is, it sounds like they are on the mark.
 

·
Registered
Joined
·
30 Posts
Discussion Starter #4
If the Turbohawk has the number 2 cam with a DL between 26" and 27.5", then 31" ATA is spot on with the tune charts and the tune charts have the Powerhawk at 32.5" for a 27" dl. So depending on what your DL is, it sounds like they are on the mark.
They are both set at 27.5" Sounds like they are right on. Thanks for the info
 

·
Registered
Joined
·
2,081 Posts
1 - 6 of 6 Posts
Top