Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter · #1 ·
I bought an alliegence this spring 29 in draw 70.6lbs was getting some erratic arrow flight being a low left tear through paper using a 340 axis arrows wb rest. proshop tried moving rest and nock point to no avail. switch to axis 300 and tear straightend out considerably. from the easton charts this arrow seems to stiff. any thought on this? any help would be appreciated.
 

·
Registered
Joined
·
399 Posts
axis

In my experience with allegiances, you usually have to shoot a stiffer spine than normal charts show because of the high energy that the binary cams put out.
 

·
Registered
Joined
·
16 Posts
I'm shooting the Carbon Excel 400. Dead on at 20, 30, and 40.
 

·
Registered
Joined
·
12,164 Posts
KingRanch said:
I'm shooting the Carbon Excel 400. Dead on at 20, 30, and 40.
KingR, what length arrows you shooting? What's you point wt.? what flechings?

I'm shooting the same arrow 28-1/2" weighing in aroung 393 grains. :thumbs_do Did you fill yours with hellium? ;)

Thanks Bill
 
1 - 5 of 5 Posts
Top