Archery Talk Forum banner

Bare Shaft Tuning,

2476 Views 22 Replies 14 Participants Last post by  GTOJoe
How Do You Do This The Right Way, I Have Heard People Doing It, And Is It That Much Better Than Paper Tuning Or Is Uit A Waste Of Time When You Can Just Paper Tune And Be Done, Please Any Imfo Would Be Great....
1 - 1 of 23 Posts
I'm using an ICS 340 with a 70lb Allegiance at 30" draw, so the shaft "should" be o.k. My limbs are maxed out already, but I may try backing them off slightly to see if that helps the bareshaft fly any straighter.
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top