Archery Talk Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Bear Redemption making a click like noise at full draw if bow is drawn quickly. If drawn slowly there is no noise. Recently had bow timing set by shop. I am guessing either limb pocket or draw stop?
Any information would be great.
 

· Vendor
Joined
·
7,235 Posts
Bear Redemption making a click like noise at full draw if bow is drawn quickly. If drawn slowly there is no noise. Recently had bow timing set by shop. I am guessing either limb pocket or draw stop?
Any information would be great.
I'd double check mod screws... maybe even remove the mod and put a little string wax on the back side where it rubs on the cam.

Most bows will make a "sound" if you snatch the string back and slam it into the stops...A video would help.
 
  • Like
Reactions: bcr33

· Registered
Joined
·
5 Posts
Mine made a noise at full draw directly from the shop, day one. I figured out that because of cam lean and possibly timing issues that string was slightly walking out of the groove/track as the cam came around to full draw.it would make a snap noise when it did. It never should have left the shop that way. I installed the optional string stop and it stops the draw just before it happens. It’s just a quick fiX though.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top