Archery Talk Forum banner

Blazer fletching problem

403 1
I'm having a problem getting my Blazer vanes to space the same distance apart when fletching 3 x 120. I'm using a Bitzenberger jig and have the nock receiver set correctly. I don't have this problem when fletching Flex Fletch or AAE Max Hunter vanes. Am I applying too much pressure when applying the clamp? Any ideas.........
1 - 2 of 2 Posts

· Registered
Joined
·
2,104 Posts
One thing I've noticed about Blazers, is they tend to curve in different directions. If you line them up on a table with the bases down and parallel to each other, some will curve to the left and some to the right. I try to match ones that curve the same way for a particular arrow. I don't know if this will resolve your problem, its just an observation I've made that might help out.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top