[cougarIIInow]

Anyone using them on aluminum arrows? All the pictures and posts that I see are with carbon. I was just wondering if they work on the aluminums also. I am a die hard long fletch man so changing to the blazers will be a shock but if they work then I am all for it.

 

[GVDocHoliday]

They'll work great on aluminum arrows. I use them on my 2613's for spot leagues. Thousands of shots a piece and not a single one fell off.

I fletch them with a hard right helical, bohning fletchtite platinum, after wiping the shaft down with isopropyl alcohol 91%. Get it squeaky clean and fletch. Let the vane stay in the clamp for about 5 minutes, rotate, and repeat.

 

[cougarIIInow]

Thanks. You fletch the same way I do. I am putting wraps on them,as they will be for hunting though.

 

[GVDocHoliday]

Thanks. You fletch the same way I do. I am putting wraps on them,as they will be for hunting though.

Wraps are good...the fletchtite and fletchtite platinum really seem to like those vinyl wraps.

 

[meanv2]

Wraps and Blazers are great together. No use to clean the new Blazers. Cleaning the shafts you are better off to use Denatured Alcohol, if you are going to but something, buy it

 

[teambringit1]

wraps/blazers rule for sure.