Archery Talk Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
For the 2014-2015 Blind side bow, does it require modules to adjust the draw length? I’m looking at possibly buying one but it’s set at 29”. The Winchester catalogs online were vague, just stating that it was adjustable.
 

·
Registered
Joined
·
256 Posts
Module based. I believe it uses the same cam system as my Quicksilver 31.
 

·
Registered
Joined
·
256 Posts
I'm not sure how the numbering system works for Winchester yet. Mine has a #1 mod set and is 27 something-or-other inches. I have sets of #5 and #6 on the way and will have a better idea then. For a $50 parts bow, I figure I may as well experiment.
 

·
Registered
Joined
·
256 Posts
Looking at the cam mounting hole shows 1-4; 5&6; and 7.
Draw length ranges from 27-30". Knowing that my #1 module gives ~27", the mod chart should be:
1=27
2=27.5
3=28
4=28.5
5=29
6=29.5
7=30
 

Attachments

1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top