Archery Talk Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3,144 Posts
Discussion Starter · #1 ·
I am currently using the Bohning Helix which works okay but I would like to be able to apply all three vanes at once. I really like the Arizona E-Z fletch but would like a 2 to 3 degree offset.

Has anyone used the Bohning Tower and have an opinion of it?
 

·
Registered
Joined
·
3,820 Posts
I have one and it works nice. I still use my E_Z most of the time. It just E-Zer to use.
 

·
Registered
Joined
·
968 Posts
ya but can you get a helical with the tower jigs just curious
 

·
Registered
Joined
·
11,803 Posts
That's the reason I bought the bohning tower, for the degree of offset. It is, however, a POS!!! You have to change parts if you are going to a different diameter shaft, mine broke!! The way it locks onto the shaft is crap also, and you need to be very careful when setting the vanes, I have had to tear off, prep, reglue vanes back on because, when the arms closed up on the shaft, and the orange ring was put on, they sometimes twist a vane so that it is not evenly spaced!!! Bottom line piece of s###!!! I bought the ez fletcher with all the extra arms made for it!! Much,much, better rig!!!!
 

·
Registered
Joined
·
3,144 Posts
Discussion Starter · #7 ·
Thanks for the info. It looks like I will stick with my Helix Jig and my E-Z fletch.
 
1 - 8 of 8 Posts
Top